Category: Schlage

(Results from 31 to 40)
What is the diameter of the Schlage L9000 02 lever?
The diameter of the 02 lever is .786". ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage
Can the L9092 for 1-3/8" door be ordered with RX?
L9090/91/92/93/95 with RX is available with 1-3/8" door and RX standard. L9090/91/92/93/95 with LX, DPS or a combination with RX are NOT available with 1-3/8" door.  Mus...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage
What is the recommended height above the finished floor for the HL6-9000?
39-15/16" above the finished floor is recommended height (to center line of lock case) for the HL6-9000 series regardless of push/pull paddle orientation....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage
Is there an offset between the Center Line of the Strike and the Lock on an HL6-9000?
The Strike Center Line is located 3/8" or 10 mm above the Lock Center Line.  Please click here for a link to the Installation Instructions; reference step 2a.   ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Push/Pull Latches » HL6/PL7/PL8 Series
What are the dimensions for the 09-509 L583-363 Large ADA Thumbturn?
Below is the 09-509 Rose with dimensions in inches: Below is the L583-363 Large ADA Thumbturn with basic dimensions in inches:          ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L400 Series | Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9200
What is the difference between LLC and LLC-ELI?
Please see the below differences when ordering L9000 with LLC versus LLC-ELI. LLC:  Less Lock Case, Cylinder, Strike & Armor LLC-ELI:  Less Lock Case Only ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage
How many degrees of lever rotation for latch retraction on a Schlage L9000 Mortise Lock?
The amount of lever rotation needed is approximately 45 Degrees....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LM9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series | Schlage Commercial » Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series
Will the L9000 mortise fit the AD / CO series mortise prep?
The L9000 will not fit the existing door prep for a CO or AD series mortise. AD / CO series door prep has a 2-1/8" hole prep for lever trim which will not work for the L9000 series ...
Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 250 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 100 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 200 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » CO 250 Series » Schlage Electronics | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage
What is the offset for the Von Duprin 6210 Electric Strike with the Schlage L9000 Mortise lock?
The Von Duprin 6210 x L9000 uses the same 3/8" Center line offset as the L9000 x Mechanical Strike. Click here for the L9000 Template showing the 3/8" offset. Click here for the Von Duprin F...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Von Duprin
Which Thumbturn is used with the Schlage L9000/LM9200 Escutcheon Inside Occupancy Indicator?
The Escutcheon Trim Inside Occupancy Indicator uses the Standard ADA Thumbturn shown below with the 09-544 ADA Thumbturn for Sectional Trim.  This applies to Occupancy Indicator Option...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9200