Category: Schlage

(Results from 21 to 30)
Can PoE be used to power the Schlage L9000 and ND electrified locks?
Schlage electrified L9000 and ND locks can be operated on PoE as long as all power requirements are met.L9000 Electrical Installation DocumentND Electrical Installation Document  ...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LM9200
What was the option XL11-800 used for?
The XL11-800 is an obsolete part number used to designate the ADA thumbturn on the Schlage L9000 series mortise locks.  Current part numbers for the ADA thumbturn for the Schlage L9000 seri...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series
Where is the Deadbolt Monitor, Latchbolt Monitor, RX Switch, EL/EU Switch and Motor Assembly located in an L9000 Electrified Lockcase?
                 The Lock Case above is shown with the Simultaneous Retractor in place....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
Which template is used to prep the door for the L9000 SL1 Trim?
There is not a specific template for the SL1 trim when used with the L9000.  Use the template  listed under the appropriate L9000 Lock Function with Rose Trim....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What is the door dimension range for the L283-064 spindle when used in the L9091, L9093 and L9095 Electrified Locks?
When used on the L9091, L9093, and L9095 Electrified Locks, the standard door range is 1-3/8 to 3"....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What is the required lead thickness for radiological rooms?
Per the Radiological council, doors require 15Kgm2 which is equivalent to 1.3mm thick.  Please check with your local code requirements. ...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage
What optional switches are offered for L9026?
The below are optional switches that can be ordered with L9026: LX RX RX/LX DPS RX/DPS RX/LX/DPS LX/DPS ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage
Are screws provided with the Schlage L9000 series Strikes and Armor Fronts when ordered separately?
When ordered separately, both the Armor Fronts and Strikes will ship with the appropriate mounting screws....
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage
What cylinder length is required for mortise HSLR trim?
Conventional cylinder 1-1/4"    SFIC cylinder 1-3/8" Standard FSIC cylinder 1-1/2" Standard Blocking rings provided with trim to ensure proper function.   ...
Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage
What is the difference between an EPT and an electrical hinge?
The choice between an electric through-wire hinge and an electric power transfer (EPT) is one of convenience vs. durability. Whereas the hinge requires almost no prep, the EPT does. However, the EPT...
Schlage Commercial » Electronic Locks | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage » Schlage