What is the break away point for MA lever spindle?
The lever spindles for the MA have a breaking torque of 45-55 ft-lb....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
What are the differences between S76806 and S76816 Falcon part numbers?
Part number S76806 are spindles used with levers on standard door thickness of 1 3/4 to 1 7/8" or knobs with a door thickness of 1 7/8 to 2 1/2".
Part number S76816 are spindles used for le...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Falcon
When was the Falcon M series mortise discontinued?
The Falcon M series mortise was discontinued in April of 2010 and was replaced by the Falcon MA series mortise.
There is no catalog available for the discontinued Falcon M series, however, the F...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
Does Falcon offer a MA series mortise service kit?
The discontinued Falcon M series did offer internal lock case parts as serviceable parts, but there was no M-series service kit....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
Does the MA541 ship with handing screws?
Due to the function of the MA541 handing screws are not required nor will be shipped with the lock. Latch bolt retracted by knob or lever from either side.Deadbolt thrown or retracted by key outs...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
Can you convert the Falcon MA851 to MA881 in the field?
In field conversion from fail safe to fail secure (or from fail secure to fail safe) is not possible on the Falcon MA series because different lock bodies are used.
A7851-12-xx&nb...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon