Category: Falcon

(Results from 1 to 10)
What is the minimum stile an MA lock can fit?
Depending on the door construction the minimum stile may differ but a safe dimension would be 4-3/4".  CUSTOMER must check door construction. The pocket depth requirements of the case is 4 1/2"....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
What mortise cylinder cam do I use with the Falcon MA lock?
IC Mortise Cylinder Cams for Falcon Cylinders: 5622-IC Falcon MA CAM for SFIC mortise cylinders, except MA381 5620-IC Falcon MA CAM for SFIC mortise cylinders MA381 inside function 5621-IC Fal...
Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
What was the difference between the Kim and Sutro lever for the M lock?
The Falcon M lock had 2 lever styles that were very similar in appearance; the Kim and Sutro, both levers were dimensionally the same.   The Kim lever was l...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Falcon
How do I order a lock for a non-standard or thick door?
Most locks will have a standard door range they will install on, but occasionally customers will want to use them on thicker doors.  In order to do so, the extended door thicknes...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series » Falcon | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Mechanical Locks » Portable » CL Series » Schlage
MA launch information
The MA was launched 4/1/10 and replaced the Falcon M lock. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Falcon
Is there a cam for a Schlage IC cylinder to operate a Falcon MA lock?
For Schlage Modular Mortise cylinders, such as the 20-001, there are two cams available to be used with the Falcon MA mortise lock: L583-638 - for Schlage modular cylinders with 1 1/8", 1 3/8...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
Is the MA indicator available separately?
See below for visual differences between indicators. ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
Is the MA lock available with the RX feature?
The MA RX features a single switch within the chassis that will monitor both the inside and outside knob/lever.  The switch is only available as Normally Open (NO)....
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
Does Falcon have a breakaway lever trim feature on mortise locks?
The MA lock does not have Vandlgard or a breakaway trim feature, however, the lever spindle on the MA lock will shear if too much force is applied in order to prevent internal lock damage and resis...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon
MA lock case dimensions.
See below for commonly requested dimensions on the MA lock.  Dimensions not found in other literature have a square around them. CL refers to "Centerline".  ...
Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon