Category: Schlage

(Results from 61 to 70)
What is included in the 37-016 reinforcement kit?
Used on the B500, B600, and CS210 when used with the 10-094 or 10-108 strikes....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage
Did the trim ring change on the B600 deadbolts?
Part number B600-015 changed to B600-070.  This ring is used for 1 5/8" - 2 1/2" standard door applications.   Part number B600-016 changed to B600-089.  This ring is used for all...
Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage
What is the diameter of the indicator rose on the B571 / D271?
The indicator rose (B571 / D271) diameter is 2.88" ...
Schlage Commercial » Mechanical Locks » Deadbolts » D Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series » Falcon | Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage
Are Schlage B250 series locks handed?
The B250 series product line does not use any parts that requires prior knowledge of the door handing....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage
What are the steel balls used for on the B600 deadbolts?
A steel ball is inserted into the housing prior to the installation of the mounting bolts for drill resistance....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage
What is the length of the B600 series thumbturn from the pivot point to the tip?
The B600 series thumbturn dimensions from the pivot point to the tip is 1.062" at the top edge and 1.30" at the bottom edge....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage
When does the fire cup need to be installed on the B500 series?
The fire cup per our installation instructions is only required for door preparation of 2 1/8" only.  ...
Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage
What is the part number for the extender rings (EXT) shown on the deadbolt IC assembly instructions P515-800?
The Interchangeable Cylinder Assembly deadbolt assembly instructions P515-800, identify the extender rings by "EXT".  Replacement rings can be purchased as a kit, 36-071 which include both the 36...
Schlage Commercial » Mechanical Locks » Deadbolts | Schlage Commercial » Mechanical Locks » Deadbolts » D Series | Schlage Commercial » Mechanical Locks » Deadbolts » D Series » Falcon | Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage
What is the diameter of the thumbturn rose on the B500 series deadbolt?
Rose measures 2.57 inches in diameter....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage
Can a residential B60 deadbolt be ordered with a 6 pin cylinder?
If a 6 pin cylinder is desired with the B60, order it as B60N6.  ...
Schlage Commercial » Mechanical Locks » Deadbolts » B Series | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage

Support by product