Category: B Series (Schlage)

(Results from 51 to 60)
What is the size of the B500 deadbolt
The dimensions of the B500 deadbolt are .81" Height and .62" Width....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage)
What is the length of the B500 and B600 outside indicator rose?
...
Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage)
B663 only throws bolt and wont retract it.
After installing a classroom deadbolt, there is potential for the thumbturn to project the bolt only, get stuck in one position, or move both directions but not move the bolt.  These are cau...
Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage)
Does the B500L come with the tailpiece?
The B500 when order less cylinder (L) will not have a tailpiece included.  ...
Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage)
What replaced the B160 B162 and B180 deadbolts?
The BC100 series deadbolt replaced the B100 series in June of 2000.  No parts are still available.The B500 series replaced the BC100 series 9/2007....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage)
What door thickness can a B500 with Indicator be used on?
The B500 series deadbolt with Indicator can be installed on the following doors.Standard: 1-3⁄8" to 1-7⁄8" conventional cylinder or thumbturnInterchangeable Core:  1-5⁄8" to 2" ...
Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage)
How to convert a Schlage B560 to Schlage B561?
Depending on the cylinder type you are using you will need the following parts:If using a conventional cylinder you will need to replace the tailpiece and blank rose. Tailpiece part number is B520-667...
Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage)
How to install the B560 with cylinder indicator.
The B500 series with indicator installation instructions can be found here. This installation video may also be helpful....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage)
When was the B571 discontinued?
Allegion discontinued the B571 on April 1st, 2024.  See the available B500 indicators here.Please click here for the B571 template. Please note the B571 requires 1 ½" bore hole....
Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage)
What is a Grade 2 Lock?
Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards: Cylindrical, Bored and Preassembled Locks & Latches 400,000 Certified Cycles ANSI/BH...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series (Falcon) | Schlage Commercial » Mechanical Locks » Cylindrical » W Series | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Deadbolts » D Series (Falcon) | Schlage Commercial » Mechanical Locks » Deadbolts » B Series (Schlage) | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series (Schlage) - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » Y Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S Series