Category: Schlage

(Results from 81 to 90)
What is the part number for a Schlage FSIC lever on an ND lock?
On ND Series locks manufactuered prior to January 30, 2017:The ND FSIC lever part number was 03-032.  ...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
How is the ND170 installed?
To install a Schlage ND170 click here for the installation instructions....
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Schlage
How is the Schlage ND lock installed?
Select the appropriate installation instructions below for step-by-step guidance on how to install a Schlage ND lock. ND-Series Installation Instructions (locks manufactured after 01-31-2017)ND-S...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
Will Schlage locks with a BD suffix accept a BEST SFIC core?
The Schlage B and BD cylinder suffixes designate less small format interchangeable core (SFIC) cylinder prep for the lock. Any SFIC, 6-pin or 7-pin, can be inserted into the l...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L400 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Mechanical Locks » Portable » CL Series » Schlage | Schlage Commercial » Mechanical Locks » Portable » Padlocks » Schlage | Schlage Commercial » Schlage
How does the ND66 operate?
When locked, the key in either lever will NOT retract the latch....
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Schlage
Is there an engraved instruction rose (previously called an indicator rose) for the ND75 lock?
If a blank rose is preferred over an instruction rose (previously called an indicator rose), the customer will need to order the lock less inside rose and order the inside rose (03-042) separately.&nb...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
What is the part number for a key in lever tailpiece for the ND lock?
For modular designs: All functions except ND85 the tailpiece part number is N523-022. The ND85 tailpiece part number is N523-123. For non-modular designs: All functions except ND85 the tail...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
What degree of lever rotation is required to operate the RX feature?
The RX switch is activated at approximately 18 degrees of lever rotation.  ...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
Can the RX switch be installed in the field on the ND lock?
As of March 14, 2016 the new improved electrified ND locks with a motor will be available with an RX switch that can be specified with the lock when ordering, or be added in the field.  To add th...
Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
Are the ND, NDe, AD and CO levers the same?
Between January 30, 2017  June of 2019, the AD and CO cylindrical lock levers were incompatible because of the ND / NDe lever and spring cage design change in January of 2017.Prior to January 30,...
Schlage Commercial » Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Schlage Commercial » Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage