What is the part number of the new plastic castlenut wrench?
Discontinued from Schlage.
The castlenut wrench material was changed from steel to a very strong polymer. The new part number is 40-017.
...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage
What products are available with an antimicrobial finish?
DESCRIPTION: The antimicrobial coating is specially formulated to inhibit the growth of bacteria by interrupting cell multiplication. The result is that the silver ions surround bacterial cells, blo...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » L9000 Series » Schlage | Schlage Commercial » Mechanical Locks » Mortised » LV9000-Series » Schlage | Schlage Commercial » Ives
Is there a flat lip option for the ND series?
There are two flat lip strike options:
Specify XQ02-309 for a 10-013 strike - specify 7/8"
Specify XQ07-351 for a 10-025 strike - specify 7/8"
...
Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
Can the D series ORB knob accept FSIC?
Only the Schlage Orbit (ORB) knob in both the A and D series can be ordered for use with a Schlage FSIC....
Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage
Does Schlage or Falcon offer a backset greater than 5"?
Only the Schlage D-knob and ND products are available with an extra long backset. The part number for backsets over 5"-42" is XC03-069, this part will ship as an extension link to be u...
Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
How does the 73 function operate?
D73PD or ND73PD (ANSI F90) Corridor Lock
Locked or unlocked by key from outside. Push-button locking from inside. Turning inside knob/lever or closing door releases button....
Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Schlage
Is there a plastic lever that fits over D series knobs?
When ADA requirements became required, Schlage created this retrofit lever to fit existing D knobs. (Orbit, Plymouth, and Tulip knobs only).
See Installation instructions here
Di...
Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage
What is the difference between D and ND series?
The D series is knob trim and the ND series is lever trim....
Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
Does the backset extension link work with a 2 3/8" latch or a 2 3/4" latch?
A and AL product: Must use the 2 3/8" backset with the 41-005 extension link
D Knob and ND product: Must use the 2 3/4" backset with the 43-005 extension link...
Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » D Series » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage