Will the AL lock fit a 2" thick door standard?
The AL series lock fits
up to 1 7/8” door thickness out of box....
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage
New FSIC driver info for the AL locks.
The new AL FSIC driver part number is A700-052.
This driver snaps onto the back of the core similar to the ND, as opposed to it being assembled into the lock chassis with a retaining ring.
Th...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage
Can you install a Schlage S lever on an AL lock?
You can not install the S lever onto an AL lock. The AL and S lever trim is not compatible with each other....
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage
What is a cylindrical lock?
Cylindrical Locks: a bored lockset whose latch or bolt locking mechanism is contained in the portion installed through the cross-boreMedium, high to extra heavy dutyCommercial, multi-family and instit...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » T Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » W Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage | Schlage Commercial » Schlage
What is a Grade 2 Lock?
Grade 2 locks are tested and certified to be in compliance with the following ANSI/BHMA Standards:
Cylindrical, Bored and Preassembled Locks & Latches
400,000 Certified Cycles
ANSI/BH...
Schlage Commercial » Mechanical Locks » Cylindrical » B Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » W Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Deadbolts » D Series » Falcon | Schlage Commercial » Mechanical Locks » Deadbolts » B Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » CS200 Series » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series - Discontinued » Falcon | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » Y Series - Discontinued » Falcon | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » H Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S200 Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Tubular / Interconnected » S-Series » Schlage | Schlage Commercial » Schlage
What is the difference between the standard lever inserts for the pre-2002 AL and the old D Lever?
The old D-Series Lever used a standard lever insert similar to the pre-2002 AL-Series standard lever insert. The old D Lever insert was smaller than the AL and the two were not compati...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » D Series - Discontinued » Schlage | Schlage Commercial » Schlage
AL-Series Plunger Assembly Instructions
Changing the plunger assembly on the AL-Series requires disassembling the chassis. Refer to Plunger Assembly Instructions for guidance....
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage | Schlage Commercial » Schlage
Which AL series levers are available with tactile warning?
On the AL-series, Saturn is the only lever available with tactile warning....
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage
What thickness is the C604-402 blank rose for the AL25?
The C604-402 blank rose is 0.163" thick with a depth of .250" when mounted on a door. The overall diameter of the rose is 3.450"...
Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series - Discontinued » Schlage