Is tactile warning available on Falcon W series levers?
A tactile warning strip is available for the Falcon W series, but only with the Quantum and Dane levers. To specify, use the prefix "6" with the lever style. Example W581PD 6DA or for small rose optio...
Schlage Commercial » Mechanical Locks » Cylindrical » W Series » Falcon
Can the W12 be surface mounted on a door?
The Falcon W12 cannot just be mounted with surface screws. The thru bolt must be used to properly install the W12 on the door. Please see instructions here for assistance on installing the W12....
Schlage Commercial » Mechanical Locks » Cylindrical » W Series » Falcon
What is a bent tab strike?
The purpose of a bent tab is so that if you experience door rattle, the tabs can be bent back slightly (toward the open area) so that the tab holds the door tightly against the doorstop/mold...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical » B Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » T Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » W Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued » Falcon | Schlage Commercial » Mechanical Locks » Mortised » MA-Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » K Series - Discontinued
What is the 161 door prep?
For Bored/Cylindrical locksets conforming to ANSI A115.2. The 161 Prep is a cylindrical lock prep with a bore diameter of 2 1/8” The edge of the door will have a 1-1/8″ x 2-1/4″ ...
Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » T Series | Schlage Commercial » Mechanical Locks » Cylindrical » W Series » Falcon | Schlage Commercial » Mechanical Locks » Cylindrical » X Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series | Schlage Commercial » Mechanical Locks » Cylindrical » K Series - Discontinued | Schlage Commercial » Mechanical Locks » Cylindrical » ALX Series
Can the 40-100 be used in the Falcon W series ?
The 40-100 multi-tail piece cylinder can be used with the W series lever function, when paired with the A700-031 tail piece. ...
Schlage Commercial » Key Systems » Cylinders » Cylinder | Schlage Commercial » Mechanical Locks » Cylindrical » W Series » Falcon