Are the Schlage "A" knobs offered in 622 black finish?
The Schlage "A" knobs are not offered in 622 as standard offering. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » A Series - Discontinued | Schlage Commercial
Can a Falcon mortise cylinder thumbturn be used on an MA lock?
Not recommend. If the thumbturn is rotated and left out of position this can cause a bind between the thumb turn cam and the hub in the lock case....
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Mortised | Schlage Commercial » Falcon
When a Falcon "W" lock is ordered in 622 are all components 622?
Lever, Roses and plugs (A or G Keyway) will be supplied in 622 (other section plugs will be supplied in 606).The latch and strike will be supplied in 613Any function using button- button will be suppl...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Falcon | Schlage Commercial
What are the latch requirements for a UL listed door?
Single-point locks and latches with 1/2-in. minimum latch throw are intended for single-swing doors, and latches with 3/4-in. minimum latch throw are intended for the active door of doors mounted in p...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Steelcraft
What replaced the N523-056 inside spindle on ND?
The N523-177 inside spindle replaced the N523-056. ...
Schlage Commercial » Mechanical Locks | Schlage Commercial » Mechanical Locks » Cylindrical | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series