Category: Ives

(Results from 31 to 36)
Will the Ives back-to-back "P" mount work on a 3/4" thick glass?
There will not be enough threads to work on a ¾" thick door, will have to order “P” mount as an engineering special for the thicker glass.  ...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Are Ives flush pulls fire-rated?
Ives flush pulls do not have a fire rating....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Is there a part number for the 1/4-28 set screw for Ives shoulder bolt?
Part number was added in the July 2024 revision to price book.  PULLPART.1290 - package of 8  ...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
What does the handing look like for a 8300 Series pull plate when the plate is larger than 4" with CFC or CFT cutouts.
The standard location as described in the IVES_Architectural_Hardware_Products_Catalog_105313.pdf places the 1 ¼" diameter CFC or  3/8" diameter CFT hole as shown below when the plate is 4" or w...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
What is the part number for the STD mount in BLK finish
The 3/8" HD Standard mount 1-1/2" – 1-7/8" door in BLK finish is PULLPART.1230....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Is the mid mounting bracket (when ordered as standard) on a latter pull centered between the other two mounting posts
When ordered as standard the mid mounting bracket will be centered between the two other mounting posts.If a different location is desired, please provide a drawing with the locations of all mounting ...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives

Support by product