Category: Ives

(Results from 21 to 30)
Can an Ives push / pull plate, or door knocker, or other hardware be engraved?
No, this is not an option (standard or special)  available from Allegion.  Engraving was discontinued in 2009....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Why are the bolts larger on the 8102, 8103, 8103EZ, 8190, 9100, 9103EZ, 9190?
In an effort to continue providing the highest quality products and align with market demand Ives has upgraded the mounting screws provided for the majority of 8000 and 9000 series pulls.The new and i...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Can you change an 8190 pull with S mounting to L mounting in the field?
The pull is machined different for the S mounting than the L mounting so this is not possible....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
How to order pulls for back-to-back application
In order to get both the inside and outside pulls on a single line item, specify with a PR ("pair") prefix, and the appropriate suffix for back-to-back mounting option (J, N, or P) based on the pull...
Schlage Commercial » Mechanical Accessories | Schlage Commercial » Mechanical Accessories » Push & Pull Plates | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Ives
Does Ives sell hands free pulls or foot pulls?
Hands free pulls are available and shown in this data sheet....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates | Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Can the 8103 EZHD be mounted with the 8300 plate using G-mount?
The G mount cannot be used with the 8103 EZHD because the small fastener does not have enough holding power on the 8300 plate.  Other available mounting types are available: Plea...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
What is the weight of the Ives long door pulls (9264 or 9266)?
These pulls weigh approximately 1 pound per foot....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Ives | Schlage Residential » Door Hardware » Ives
Does Ives offer a vandal resistant plate, similar to a VR900, that will protect an electric strike?
The LG7 lock guard...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives
Is the 8400 kickplate available in silver finishes over a brass substrate?
Yes, as an engineering special....
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Ives
What is the difference between N mounting and J mounting for door pulls
Both the N and J mounting are the same type of mounting in that they are both back to back mountings, but they are different sizes.  The J mounting uses a size 5/16-18 screw, while the N mounting...
Schlage Commercial » Mechanical Accessories » Push & Pull Plates » Ives | Schlage Commercial » Ives

Support by product