Category: Schlage

(Results from 1 to 10)
What is a 30-003 holdback cylinder?
Schlage used to offer a holdback cylinder that could be used with the L9050, L9080, and L9082. The cylinder had a special 2-piece lazy cam that allowed the cam to be rotated only about 120 degrees whe...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
Schlage AL small format spacer installation requirements.
The Schlage AL-Series SFIC locks require one (1) small format spacer (D500-000) for 7-pin cores and two (2) small format spacers for 6-pin cores.  When these spacers are not instal...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » AL Series » Schlage
Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available)....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Deadbolts » D Series » Falcon
What is the thread on a mortise cylinder?
The thread spec on Schlage and Falcon mortise cylinders is 1.150 x 32...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What cylinder do I use with Monarch key in lever trim?
The Monarch KIL trim uses the following cylinders: Schlage Cylinders 23-013 Conventional 20-750 Primus 20-750-XP Primus XP 20-550 Primus UL437 20-550-XP Primus UL4...
Schlage Commercial » Exit Devices » Touch Bar » 19 Series » Falcon | Schlage Commercial » Key Systems » Cylinder Category » Falcon | Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What is the length of a cylindrical tailpiece?
Key-in-lever tailpieces differ in length depending on the lock series, function, and design.  Click here to identify the tailpiece and length.    NOTE: Modular cyl...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What is the difference between legacy Primus, Primus RP and Primus XP?
Legacy Primus refers to the original Primus cylinders and keys that are no longer under patent protection. Primus XP carries patent protection to 2024 and Primus RP, released in August 2021, extends p...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Keys » Keys » Schlage
How is the split key construction insert retained in a cylinder?
With split key construction keying there are two ways the construction insert is retained in the cylinder so that it won't fall out the back end of the plug, see Figure 1.  The key...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What cylinders are available with UL437?
UL437 is testing requirement that cylinders pass both a timed cylinder pick test, a forceful core/cylinder pull test as well as a destructive entry test.  We have various cyli...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Cylinders » Cylinder » Falcon
What cylinder length options are available?
There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convention...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage