What is the part number for the Schlage thumbturn rim cylinder?
The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with ...
Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
Why is the plug pulling out of the FSIC 23-030 mortise housing?
ISSUE: After some use the plug will begin to project from the cylinder face and will ultimately pull completely out.
ROOT CAUSE: In a dogged application the cam was rotated 180 degrees which als...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
Mortise cylinder with switch.
The XB09-195, XB09-795, and XQ11-804 are basically modified mortise cylinders. The overall length of the mortise cylinder switch is approximately 1-9/16" (1.563"). The diameter of the cylinder face is...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
When did the modular cylinder launch?
Modular cylinder was launched July 26, 2010 and replaced the standard key-in-lever, mortise, and rim cylinders.
For a list of cylinders not affected by the modular cylinder design change cli...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
What are the keyway types and patents?
HIGH SECURITY
Primus/Primus XP: In addition to six cuts for standard locking mechanism, there are five side finger pins to operate the secondary sidebar lock. Primus keys will operate non-Primus...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Keys » Keys » Schlage
What color is the Schlage ND conventional tailpiece?
The current ND lock uses a gold tailpiece, N523-022, for all conventional non-ic applications....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Mechanical Locks » Cylindrical » ND Series » Schlage
What is a Primus lock out cylinder?
When you want to periodically disable and block access to a certain room in a building or an entrance door, that’s when you would need to use a Lockout Cylinder. See full document....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage
How to identify a Primus system using the 6 digits on the key.
The 6 digits stamped on the key can be referenced by the Key Control group to identify the system. Please call 877-671-7011 option 1, option 1 and request the Key Control....
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » Key Systems » Keys » Keys » Schlage
What cylinder and cam is used with the 650 series keyswitch?
If blocking rings (PN 36-079) are needed, specify dimensions when ordering. See below for blocking ring (PN 36-079) dimensions. Blocking RingSpecify Dimension 1//8" 012 3/16" ...
Schlage Commercial » Key Systems » Cylinder Mechanism » Schlage | Schlage Commercial » System Components » Keyswitches » 650 Series » Schlage Electronics | Schlage Commercial » Schlage