Category: Falcon

(Results from 1 to 10)
Why does an EL1790 retract but can be bounced out of electric retraction?
Check for correct power supply, PS873-2/4TD or PS914-2RS/4RL, and verify the wire gauge from power supply to the EL1790 device either 14 or 12 gauge....
Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
How do I add outside cylinder operation to a 1790EO device?
Use the 1790 NL/HB cylinder assembly, part number CYLASY.1151 and a rim cylinder....
Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
Are lever trims available for DOM devices?
The only Falcon Doromatic device with a lever trim option trim is the 1790 device....
Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
Will the standard cylinder drive bushing on a 1790 device work with my 179L trim?
Step 3 and 4 of 179L Instructions will show the old drive bushing being removed & the new drive bushing getting installed...
Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
Do we offer electrified trim for DOM devices?
There is no electrified trim for the DOM line of exit devices....
Schlage Commercial » Exit Devices » Cross Bar » 1990 Series » Falcon | Schlage Commercial » Exit Devices » Cross Bar » 2090 Series » Falcon | Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
What parts are required to add a cylinder to the 1790 EO?
You will need a 1790NL/HB cylinder assembly (part number CYLASY.1151) and a rim cylinder....
Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
What is the difference between ED and EL for Doromatic devices?
EL only retracts the latchbolt or vertical rods/latches. Pulling on or tampering with the push bar has no effect on the solenoid plunger remaining seated in the solenoid. ED retracts t...
Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
How should the KR4954 mullion be ordered if used with another manufacturers device?
When using Von Duprin KR4954 mullion with other manufacturer exit device such the mullion must be ordered blank with no strike prep. ...
Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
How far down can an exit device be cut down in the field?
For most exit devices, please refer to the specific device series catalog for minimum door opening width the device can be cut down to fit.   Be aware that some device options, frame co...
Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Are the solenoids for DOM and Von Duprin the same?
The solenoids for Von Duprin and DOM are different....
Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin

Support by product