Category: Falcon

(Results from 11 to 20)
Does the wire size of an EPT affect the operation of an EL device?
Since most wire transfer devices such as an EPT or electric hinges cannot provide large gauge wires, we take the small gauge wire into account when determining the overall wire size for the device.�...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Schlage Commercial » System Components » Power Supplies » EPT Series » Von Duprin
Is cylinder dogging available on the 1790 device?
Since the entire pushpad moves on the DOM 1790 device true CD is not available on the device. The hold back function(HB) can be used from the pull side and hold the latchbolt retracted similar&nb...
Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
How do you test the potted circuit breaker or potted module on an EL device?
For Potted Modules (black color) shipped before August of 2012, you can test by applying power to the potted circuit breaker to and if good the following voltages will be seen (be careful to...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
What is the power supply needed for the Dor-O-Matic EL devices?
PS914 with either the 900-2RS option board for powering 1 or 2 devices or the 900-4RL option board for up to 4 devices....
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon | Schlage Commercial » Power Supplies » Standard » PS900 Series » Von Duprin
Why will my EL device not release the solenoid?
Try these steps:Disconnect power from the EL device, if the solenoid plunger releases then and issue is with power going into the device.If it still does not release, try to pull the plunger out of th...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Can a 1790 replace a 1690?
This is possible but the 1790 may not go back into the same location on the door as the 1690 device due to the difference in device backsets. The 1790 must maintain the 3/4" backset from the face...
Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
Is there a conversion kit to add Electronic Dogging (ED) or Electric Latch Retraction (EL) to a 1690 or 1790 in the field?
There is no conversion kit to add EL or ED to an existing 1690 or 1790 series device. All of the components are built into the device, since the device does not have a separate basepla...
Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
What material is the end cap and the centercase cover on the 1690 and 1790 made from?
Both the end cap and center case cover of the 1690/1790 are an aluminum die cast material....
Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
What is the part number for Doromatic EL solenoid?
The part number for the solenoid for the 1690/1790/2390 is 971687-00 and for the 1490/1590 is SOLENOID.142 (which is 971687-00 with a machined bracket).  The solenoid characteristics are the same...
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon
Are the Falcon EL solenoids rated for continuous duty?
The Falcon EL devices can be operated in a continuous duty cycle....
Schlage Commercial » Exit Devices » Recessed » 2390 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1490 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1590 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1690 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 1790 Series » Falcon

Support by product