What finish process is used on the Von Duprin Inpact exit device series 94 and 95?
When ordering standard 94/95 The push bar will an anodized finish, unless ordering a powder coat finish.
,and the push bar end caps are always black powder coat 622/315, unless you ask us ...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin
Is there a way to make EL devices quieter?
You can't make the EL device quieter. The inrush of current causes the plunger and solenoid to make noise.
A quieter option would be motorized electric latch retraction. Von Duprin h...
Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT | Schlage Commercial » Exit Devices » Touch Bar » 24 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Falcon | Schlage Commercial » Von Duprin
What is the part number for the 94/95 Inpact mortise lock body?
The 94/9575 Inpact Series Mortise Exit Device uses the 7500-IN Mortise Lock.To order the mortise lock only, specify either;7500-IN x finishORSS7500-IN x finish (if a latchbolt monitor switch is desire...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT
Can the 94/95 Impact devices be cut down in the field?
The Von Duprin 94/95 Series Exit Devices cannot be cut down in the field.As shipped, the standard size can be used on doors that are 2'10" - 4" wide.There is a smaller size for use on doors that are 2...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Recessed » 94/95 Series INPACT