Did the Falcon 4023 and F4023 mullion change?
        
        
                            
	
		Effective September 1, 2014 customers will continue to order the Falcon 4023 and F4023 but will receive a slightly modified and improved mullion offering.
	
	 
	The NEW Falcon 4023 and...                    
        
                        Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Falcon | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin        
     
    
    
    
    
                
            Can I cut a Von Duprin mullion from the bottom rather than the top?
        
        
                            It is not recommended to cut a mullion from the bottom as this will lower any strike templating on the mullion body cause the strike and exit device to be misaligned....                    
        
                        Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin        
     
    
                
            Where is the fire label located on a fire rated mullion?
        
        
                            The UL fire label is at the bottom of the fire rated mullion.  The mullion also ships with a sticker which notes the bottom of the mullion should not be cut.  Cutting would remove the fire l...                    
        
                        Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Falcon | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin        
     
    
                
            What do I need to order to convert a KR4954 to KR4854 mullion?
        
        
                            The KR4954 has the same mullion body and most of the same KR kit parts as a KR4854 mullion.  However, the KR4854 uses the fire rated (9854/9954) top fitting components.  So these top fitting...                    
        
                        Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin        
     
    
                
            Is it possible to electrify an existing 4954 Von Duprin mullion?
        
        
                            Existing Von Duprin 4954 mullion can be electrified.  The conversion requires the KR54-F Retrofit Kit (Part 050169), the Female Wire Assembly (Part 105988), and the Male Wire Assembly (Part 10598...                    
        
                        Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Von Duprin