Category: 88 Series

(Results from 11 to 15)
What is an HW device or HW mullion?
HW is Allegion-specific nomenclature used when specifying hurricane rated devices and mullions that are for use in non-impact (Wind-Only) hurricane zones.  The devices may require special strik...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
How do I change the handing of a Von Duprin 8875 or 8875-F device?
The mortise lock is field reversible with no additional parts needed.  Reference installation instructions linked here for re-handing a 7500 mortise lock body. The center case has a co...
Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin
How do I change the handing of a Von Duprin 8847-F device?
The center case has a component that is handed and can be ordered and field changed: Latch Control RHR door  #050210 Latch Control LHR door  #050209 ...
Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin
Is Cylinder Dogging available on Von Duprin 88 Series Exit Devices?
Cylinder Dogging is not an option on the 88 Series Exit Devices....
Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Von Duprin
Is the Schlage L9000 mortise lock compatible with Falcon and Von Duprin mortise exit devices?
The Schlage L9000 Series mortise locks are NOT compatible with Falcon and Von Duprin mortise exit devices.Falcon mortise exit devices (25-M/F-25-M) use the 8500NL mortise lock.Most Von Duprin mortise ...
Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Touch Bar » 25 Series » Falcon | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series