What 55 Rim device type do I need to work with a 379L?
For a 55L application, the cross-shaped spindle on the back of the 379L requires that the device be furnished as an NL function, not an EO function. The trim spindle operates the NL cam in the d...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Cross Bar | Schlage Commercial » Exit Devices » Cross Bar » 55 Series | Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Von Duprin
What is the difference between the 471U, the 472U, and 473U strikes?
The 471U is for a 5547 with a metal door and frame.The 472U is for a 5547WDC with a wood frame and a 1-3/4" thick door. The 473U is for a 5547WDC with a wood frame and a 2-1/4" thick door. ...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Cross Bar | Schlage Commercial » Exit Devices » Cross Bar » 55 Series | Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Mechanical Accessories | Schlage Commercial » Von Duprin | Schlage Commercial
What Is the mounting hardware for a 55 rim with a 550DT
The 55 device uses 12-24 screws into 625A or 625B sexbolts.
Always reference the instruction sheets as us.allegion.com to confirm the latest information.
...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin
Is there a cover plate for the door edge cut out for a 556NL-CA?
There is no door edge cover plate provided for the 556NL cylinder assembly. However, Von Duprin part number 900555 can be used if a cover plate is desired. ...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Von Duprin
How do I order a scalp plate for the door edge for a 5547WDC?
There are two possible scalp plates, depending on the trim application and door preparation. Both are ordered by description as configured products (category: cover plates). They are&nbs...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin
What is an HW device or HW mullion?
HW is Allegion-specific nomenclature used when specifying hurricane rated devices and mullions that are for use in non-impact (Wind-Only) hurricane zones. The devices may require special strik...
Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Exit Devices » Cross Bar » 88 Series | Schlage Commercial » Exit Devices » Cross Bar » 88 Series » Von Duprin | Schlage Commercial » Exit Devices » Mechanical Accessories » Mullion » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 22 Series | Schlage Commercial » Exit Devices » Touch Bar » 22 Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series | Schlage Commercial » Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series | Schlage Commercial » Exit Devices » Touch Bar » 98/99 Series » Von Duprin
Does the 55-EO rim device have the parts necessary to receive a rim cylinder?
The 55-EO device does not have the parts needed to receive a rim cylinder. It must be retrofitted using the 55CK-NL conversion kit which is Part 050105....
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Cross Bar | Schlage Commercial » Exit Devices » Cross Bar » 55 Series » Von Duprin | Schlage Commercial » Von Duprin