Category: Exit Devices

(Results from 81 to 90)
What is the part number for the solenoid in the 94/95 electrified device? Customer has a part# of 113-189 that he stated was discontinued?
If customer has an  EL94/95 ordered before 2000,   order new QEL94/95.If ordered after year 2000,   order part # 958005-00. ...
Schlage Commercial » Exit Devices
How to order sample requests of a specific finish
Please contact  your local Allegion Regional Sales Office (RSO).  For finish samples, typically a small representative part can be ordered,  such as a cover plate for an exit devi...
Schlage Commercial » Exit Devices
Is the windstorm (WS) 98/99 series device handed?
The center case on the windstorm device is handed because both linkages for the vertical rods are designed to travel in an upward motion....
Schlage Commercial » Exit Devices
What would cause the 2390 push bar to bind or not release properly?
Overtightening the anchor studs will cause a bind  in the push bar, and the push bar will not release or extend properly.  Refer to the installation instructions....
Schlage Commercial » Exit Devices
what key cylinder does teh 5547NL x 555NL use?
1-1/4" rim cylinder....
Schlage Commercial » Exit Devices
What is the part number for the Falcon 2390 anchor block assembly ?
The part number for the Falcon 2390 anchor block assembly is BLOCK.103...
Schlage Commercial » Exit Devices
What exit device should I use on a balanced door?
For balanced door applications, please see the Von Duprin price book under "Special Order Products" for a balanced door option. This special provides a 3' Device with a 4' Mechanism case.  ...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Mechanical Accessories | Schlage Commercial » Exit Devices » Touch Bar
Can the VR900 be mounted back to back with some kind of pushplate on inside or push side of door?
No, the studs on the VR900 do not align with exit device mounting patterns....
Schlage Commercial » Exit Devices
Can an F-25-V be cut down to 28"?
No.The 24/25 catalog states the shortest length that  a 3'  25 series device can be cut  is 31-1/8".For additional information, please contact Allegion product support at 877-671-7011,&...
Schlage Commercial » Exit Devices | Schlage Commercial » Exit Devices » Touch Bar
Is The QEL Polarized?
No. The power wires to the QEL are not polarized...
Schlage Commercial » Exit Devices | Schlage Commercial » Von Duprin | Schlage Commercial

Support by product