Category: Exit Devices

(Results from 71 to 80)
When ordering either a 55 or 88 end case with monitoring features, would device be ordered as a CB MS (cross bar monitoring switch) or as an RX switch?
RX switch...
Schlage Commercial » Exit Devices
Can I use the Von Duprin PS873 for the E996 lever trim?
The PS873 was discontinued around 2010.Please use an Allegion PS900 series power supply for your electrified options.  For additional assistance,  please contact Allegion support at 877-671-...
Schlage Commercial » Exit Devices
Is the 718TL available for use with the 25 series?
The 718TL is only used with concealed vertical rod devices (24-C and 25-C).  Use instructions from the 712L (23792526)....
Schlage Commercial » Exit Devices
Is the extrusion process that we use for the 98/99 mechanism case a hot or cold extrusion?
The aluminum extruded channel is a HOT extrusion. ...
Schlage Commercial » Exit Devices
How do I order glass bead kits for concealed cable exit devices (33/3549A, 98/9949, 98/9950WDC)?
33/3549A: ¼” kit – request one 33/35A-GBK-R and one of this applied panel kit: INS-4-KIT-33/3549A (#24122293) ½” kit – request two 33/35A-GBK-R and one of this applied panel kit: INS-2-KI...
Schlage Commercial » Exit Devices
Are the Von Duprin 98/9927 latches fire rated?
Yes, there are fire rated options for the 98/9927 devices and latches.   If you are unsure about device ratings,  or how to select a device,  please contact Allegion tech support ...
Schlage Commercial » Exit Devices
Do Von Duprin and Falcon exit devices have date codes on them?
Exit devices have a four digit date code inside the mechanism case near the end cap.  The first two digits represent the month, and the last two digits represent the year....
Schlage Commercial » Exit Devices
Can the 360L-DT be used with the 330/350 dummy bar?
Here are the appropriate 360L-DT lever control mounting packages that contain finished screws and washers for back to back mounting with a 330/350 dummy bar (specify finish):   1 3/4" thick...
Schlage Commercial » Exit Devices
Does a standard 1990 panic 44" appropriately cover a 48" wide aluminum store front?
The 44" device will fit 3’8” door.For a 48" door,  you  would need to get 48” cross bar and cut in field. ...
Schlage Commercial » Exit Devices
When ordering an HH device, are EL or QEL options in the 98/99 series
EL, QELA, and  PN (Pneumatic latch) retraction are available...
Schlage Commercial » Exit Devices

Support by product