Category: Exit Devices

(Results from 61 to 70)
Does Falcon make a mounting plate to allow a wide stile exit device to be installed on a narrow or medium stile?
No, Falcon does not make any kind of plate to put on a door with an inadequate stile for our exit devices.  Please reference the device templates for Falcon's minimum stile requirements....
Schlage Commercial » Exit Devices
Is the Von Duprin 55 dogging screw the same as the 88 dogging screw?
No, they are not the same.Contact Allegion Technical support for assistance if you do not find the correct part in the price book....
Schlage Commercial » Exit Devices
What do I need to convert a 1990EO device to a 1992 (NL function)?
The 1990 auxiliary package contains the parts to convert to NL function.Order the following part numbers:Silver  #4270902091Brown #4270902095Black  #4270902779...
Schlage Commercial » Exit Devices
What switch do I need to use with a Von Duprin 22 device to be able to use a mag lock?
Use part number:  050251-00Please see the price book or contact product support if you have additional questions....
Schlage Commercial » Exit Devices
WHAT IS THE 940 TRIM CAM SERVICE KIT PART # ?
The 940 Trim Cam service part kit is:   040171-00...
Schlage Commercial » Exit Devices
Can you field add an RX switch to a 1690/1790 exit device?
The 1690 and 1790 exit devices built after 2002 can have the RX switch kit added in the field.  The part number is SWITCH.1006....
Schlage Commercial » Exit Devices
What does a Von Duprin glass bead kit contain for concealed rod applications (GBK-CV)
The GBK-CV and GBK-CV-WDC contain glass bead shims as well as a unique bottom rod and bottom rod linkage.  ...
Schlage Commercial » Exit Devices
Does the push pad pull in when an EL or QEL device is energized?
The push pad pulls in when a QEL device is energized, but it does not pull in when an EL device is energized.  This can be relevant if a push pad monitor switch (RX) is being used.  It can a...
Schlage Commercial » Exit Devices
What is the centerline of lever when using with 5547?
The centerline of the lever to the finished floor:5547L-F CL of lever handle to finished floor = 40-7/16"5547L CL of lever handle to finished floor = 53-1/2"5547WDC-L-F CL of lever handle to finished ...
Schlage Commercial » Exit Devices
Are there special instructions for a 9947 on an Insulclad door?
No, there are no special installation instructions.If you have questions,  please contact product support at 877-671-7011,  option 2,  then option 3. ...
Schlage Commercial » Exit Devices

Support by product