Category: Exit Devices

(Results from 21 to 30)
What are the part numbers for the Schlage blocking rings?
Depending on the application, there are two types of blocking rings offered for mortise cylinders- One for use with a compression ring, and one for use without.  When a compression ring is used, ...
Exit Devices | Schlage
What are ANSI BHMA hardware grades?
The American National Standards Institute (ANSI) and Builders Hardware Manufacturers Association (BHMA) have developed durability, strength and performance standards for every type of door hardware on...
Door Controls | Door Controls » Overhead Concealed | Door Controls » Concealed | Door Controls » Fire Life Safety | Door Controls » High Security | Door Controls » Surface Mounted | Exit Devices | Mechanical Locks | Ives | Von Duprin
Does Von Duprin's factory refurbish exit devices?
Von Duprin does not offer a service to refurbish exit devices at the factory.Replaceable service items for some exit device parts are available for sale.Please contact technical product support a...
Exit Devices | Exit Devices » Cross Bar | Exit Devices » Mechanical Accessories
Where are the shims used for the 19 series?
Shims are used on device side, not the trim side....
Exit Devices
What is the CD part number 610106-00
REPLACE WITH 6500059 FOR 17,18,19...
Exit Devices
What is the part number for the Trim Device Cable to connect an E996 or RX996 or E7500 to a Chexit module?
The Trim/Device Cable part number is 040193.  If a Chexit device is ordered with an E996/RX996/E7500 from the factory, the trim/device cable is automatically furnished at no additional charg...
Exit Devices | Exit Devices » Touch Bar | Exit Devices » Touch Bar » 98/99 Series | Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Von Duprin
Can fire rated exit devices have electric latch retraction?
Yes, fire rated exit devices can have electric latch retraction.  However, the devices must be tied into a fire alarm system to remove power from the units so the doors will be latched in the cas...
Exit Devices | Exit Devices » Touch Bar | Falcon | Von Duprin
EL Device Troubleshooting Guide
VISIT US.ALLEGION.COM/EL-SUPPORT FOR TROUBLESHOOTING VIDEO, DOWNLOADABLE GUIDE, AND INSTALLATION INSTRUCTIONS(For best viewing, use Chrome or Firefox browser.)ALLEGION EL SOLENOID ELECTRIC L...
Exit Devices | Exit Devices » Recessed | Exit Devices » Recessed » 2390 Series | Exit Devices » Recessed » 94/95 Series INPACT | Exit Devices » Touch Bar | Exit Devices » Touch Bar » 1490 Series | Exit Devices » Touch Bar » 1590 Series | Exit Devices » Touch Bar » 1690 Series | Exit Devices » Touch Bar » 1790 Series | Exit Devices » Touch Bar » 24 Series | Exit Devices » Touch Bar » 24 Series » Falcon | Exit Devices » Touch Bar » 25 Series | Exit Devices » Touch Bar » 33A/35A Series | Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Exit Devices » Touch Bar » 98/99 Series | Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Falcon | Von Duprin |
Von Duprin 230L Trim Redesign
As previously announced, Von Duprin 230L trim used with the 22 series device has been redesigned with modifications to the lever assembly. -      Complete Marketing Bulletin- Desc...
Exit Devices » Touch Bar » 22 Series | Exit Devices » Touch Bar » 22 Series » Von Duprin
Why should you use the LX switch with an ALK being used in Von Duprin surface vertical rod devices?
You should use the LX switch with the Von Duprin surface vertical rod exit device because the rods are exposed and are vulnerable to attack. IE, the top rod can be grasped and forced down to retrac...
Exit Devices » Touch Bar » 22 Series » Von Duprin | Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Exit Devices » Touch Bar » 98/99 Series » Von Duprin