Category: SC70 Series

(Results from 21 to 28)
Can you mount a Falcon SC71A pull side with swing clear hinges?
The SC71A closer mounted pull side will work with swing clear hinges.  You would just need to locate the closer and arm from the Center Line of the swing clear hinge pin. ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Surface Mounted » SC70 Series
Is there a Falcon closer that can swing 180 degrees when mounted pull side?
All of the Falcon series closers ( SC60A, SC70A, SC80A and SC90A) can achieve a 180 opening when mounted pull(hinge) side. ...
Schlage Commercial » Door Controls » Surface Mounted » SC60 Series | Schlage Commercial » Door Controls » Surface Mounted » SC70 Series | Schlage Commercial » Door Controls » Surface Mounted » SC80 Series | Schlage Commercial » Door Controls » Surface Mounted » SC90 Series
Will a Glynn Johnson 104S work with a Falcon SC71A pull side mount closer?
You will need to use the SC70A-18 drop plate and use the bottom middle holes for mounting to avoid conflict with the GJ100 series in top of the door.Note:  the lower screws are another ¾” down...
Schlage Commercial » Door Controls » Surface Mounted » SC70 Series
Are there any additional size thru bolts available for Falcon closers, for doors other than 1 3/4" thick?
Falcon SC Series closers (SC70A, SC80A, SC60A) only come with Thur bolts for a 1 ¾" thick door.Potential solution:  LCN does offer TB's for 1 3/8" or 1 5/8" doors and these TB's could be used wi...
Schlage Commercial » Door Controls » Surface Mounted » SC60 Series | Schlage Commercial » Door Controls » Surface Mounted » SC70 Series | Schlage Commercial » Door Controls » Surface Mounted » SC80 Series
What material are the Falcon SC series closer drop plates made of?
The drop plates for all the Falcon door closers are made of steel.  ...
Schlage Commercial » Door Controls » Surface Mounted » SC60 Series | Schlage Commercial » Door Controls » Surface Mounted » SC70 Series | Schlage Commercial » Door Controls » Surface Mounted » SC80 Series
What is the maximum reveal for a Falcon SC70A closer mounted push side Top Jamb?
Maximum reveal is 3 ¼".For Catalog cut sheet, see here....
Schlage Commercial » Door Controls » Surface Mounted » SC70 Series
Does LCN and Falcon share the same spring stop block?
Yes, All LCN Spring cush blocks except for the 1250 and 1450 closers, are the same as the spring cush block as the what is used on the Falcon SC closers Spring stop arms. ...
Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series | Schlage Commercial » Door Controls » Surface Mounted » SC70 Series
Is the auxiliary 62A shoe the same for all closers?
The 62A auxiliary shoe from LCN is the same and interchangeable between the different LCN series closers. The Falcon closers have their own version of the 62A auxiliary shoe, which is the same and int...
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4030 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » SC60 Series | Schlage Commercial » Door Controls » Surface Mounted » SC70 Series | Schlage Commercial » Door Controls » Surface Mounted » SC80 Series | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series

Support by product