Category: 4010 Series

(Results from 31 to 34)
Did LCN offer a H180 hold open arm at one time?
The H180 hold open arm option was only available for the 5010/5030 overhead concealed closers, and for 4010 series when used with a corner bracket.  This H180 arm was discontinued on Oct. 15th, 2...
Schlage Commercial » Door Controls » Concealed » 5030 Series | Schlage Commercial » Door Controls » Overhead Concealed » 5010 Series | Schlage Commercial » Door Controls » Surface Mounted » 4010 Series
Did the arm screw, that attaches the arm to the closer body, on the LCN manual closers always attach from the top?
Back in the 60’s LCN arm screws were in the front of the arm not on top. These old arms could be used with newer closers but the new arms will not work on one of these older closers as the top of th...
Schlage Commercial » Door Controls » Surface Mounted » 4010 Series | Schlage Commercial » Door Controls » Surface Mounted » 4020 Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series
Can you use the Backcheck adjustment on a closer as a stop?
The Backcheck regulation adjustment is used to help cushion the door opening so it doesn't slam into a wall.   Backcheck should not be used as a door stop....
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4010 Series | Schlage Commercial » Door Controls » Surface Mounted » 4020 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040 Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series
Is there an extra duty arm available for the 4010 series closer?
For the 4010 series closer to be ordered with an extra duty pull side arm, it will need to be specified with ST-2336.  This is a 4010 closer with the extra duty, solid 4510 arm. ...
Schlage Commercial » Door Controls » High Security » 4510 Series | Schlage Commercial » Door Controls » Surface Mounted » 4010 Series

Support by product