Can LCN drop plates be order with SRI?
LCN does offer SRI on drop plates. The plate will be stamped with SRI on the plate as well if it has SRI pre-finish....
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » High Security » 4210 Series | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4010 Series | Schlage Commercial » Door Controls » Surface Mounted » 4020 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series
Is the 1460-18PA and the 1460T-18PA the same drop plate?
The 1460-18PA and the 1460T-18PA are the same drop plates and could be used for parallel arm mounts, as well as track arm stop face (push side) mounting as long as you follow the proper template for t...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series
What does SRT stand for on LCN screws?
SRT means – Self Reaming & Tapping – these screws only need a pilot hole drilled, and will ream and tap the screw threading while being installed. SRT screws are not recommended w...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series
Does LCN have a thumb turn hold open type door closer?
LCN has the HCUSH or SHCUSH arm styles that have a thumb turn hold open. Both arm styles are parallel arm push side application only...
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series
What closer meets ANSI 156.4, PT-4G code?
PT-4G stands for a closer with built in dead stop which would be an LCN door closer with a CUSH style arm.LCN catalog information ANSI 156.4 code reference....
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series
How do you prep a hollow metal door and frame for LCN machine screws?
To prep a hollow metal door and frame for LCN 1/4-20 machine screws you will first want to locate the proper location for mounting the closer and arm using the provided instruction sheets. ...
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4010 Series | Schlage Commercial » Door Controls » Surface Mounted » 4020 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series
Is there a special LCN HCush arm with a special t-handle?
ST-2468 is a special HCush or Spring HCush arm with the wings removed from the hold open handle and replaced with a ½” hex screw cap. This ST will work for 4110, 4210, 4040xp, 1460, 4030. Thi...
Schlage Commercial » Door Controls » High Security » 4210 Series | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4030 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series