Category: 1460 Series

(Results from 31 to 40)
Can you mount a 1460 EDA with Wide Throw hinges and still get 180° of door opening?
Yes this can be accomplished by using ST-2430, which is a custom long EDA arm.  When ordering the 1460 EDA closer specify ST-2430 and also provide hinge size and degree of opening.  If using...
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series
Did LCN ever offer an EDA145 arm?
LCN did offer a EDA145 arm at one time but it was obsoleted in Jan. 2010. This was an EDA arm that had a special PA shoe that was made for applications that had a flush head frame condition on the pus...
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040 Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series
Is the LCN spring cush block the same for all LCN series closers?
The 3080-spring block is the same for all LCN closers and interchangeable between the different series except the 1250 and 1450 series closers.  The 1250 and 1450 use the same spring cush block.&...
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4030 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series | Schlage Commercial » Door Controls » Surface Mounted » 1250 Series | Schlage Commercial » Door Controls » Surface Mounted » 1450 Series | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series
Can you purchase just the hold open nut for the HEDA arm?
The hold open nut for the HEDA arms on some series can be replaced. The part number is the -41 and is found in the 4040XP, 4110, 1260 and 1460 series and the 4050A will use the 4040XP-41...
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series
Is the 1460-3077 regular arm the same as the 1450-3077 regular arm?
These arms are not the same and cannot be interchanged....
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 1450 Series
Is the 1260 Cush arm the same as the 1460 Cush arm?
The Cush and HCush arms are the same for the 1260 and 1460 series closers....
Schlage Commercial » Door Controls » Surface Mounted » 1260 Series | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series
Do fire rated wood door require the door closer to be thru bolted?
According to the UL listing: for fire rated wood doors the use of sex bolts or through bolts to mount the closer to the door is required for wood or plastic-faced composite-type fire doors unless an a...
Schlage Commercial » Automatic Operators | Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4010 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series
Is there an ST to mount a 1460 top jamb on an 18-inch door leaf?
Special template, ST-2439, is used to mount a 1460 closer top jamb on an 18-inch-wide door.  This is special templating only, no special parts....
Schlage Commercial » Door Controls » Surface Mounted » 1460 Series
What is the size of the additional screws that are needed for mounting an LCN closer parallel arm with a 1/4" solid weatherstrip?
For the 1250 and 1450 closers:Qty of 4 of DP# 71858 – ¼-20 X 25 mm (.984”) Pan HeadQty of 1 of DP# 71853 – ¼-20 X 38 mm (1.496”) Flat Head The standard screws for the 1250 and 1450 are ...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Surface Mounted | Schlage Commercial » Door Controls » Surface Mounted » 1260 Series | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4030 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series | Schlage Commercial | Schlage Commercial » Door Controls » Surface Mounted » 1250 Series | Schlage Commercial » Door Controls » Surface Mounted » 1450 Series
How do you change the handing of CUSH and SCUSH arms?
The handing of the CUSH, HCUSH, SCUSH, and SHCUSH arms can be changes by moving the stop/spring block form one side of the shoe to the other. The CUSH shoe stop requires a 5/16 hex wrench.The SCU...
Schlage Commercial » Door Controls » Surface Mounted » 1260 Series | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series | Schlage Commercial » Door Controls » Surface Mounted » 4040XP Series | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series | Schlage Commercial » Door Controls » Surface Mounted » 4050 Series

Support by product