Category: Senior Swing

(Results from 71 to 80)
Are the 2810, 2850 and 2860 Center Pivot arms the same?
The Center Pivot arms are the same across all 2800 series Senior Swing operators (2810, 2850, 2860)....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What is the size of the blue and white automatic door decal -155-2?
This Blue and White activation label is Part # 155-2 and is only available in English.  This label is not part of the Operator Label kits, it is shipped with most of our push button actuator...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial » Door Controls » Automatic Operator » 8310 Series
What is the thickness of the senior swing filler and spindle plates?
 The senior swing filler plates (-12) and the spindle plate (-11A or 11B) are 3/32” thick....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Does the Sr Swing -18 mounting plate come with any holes prepped?
The Sr Swing -18 mounting plate does not come with any holes prepped. All holes for mounting to the frame and mounting the operator to the plate would be completed in the field....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What is the size of the shaft arm screw on the senior swing operator?
The hex head arm screw that holds the arm onto the shaft of the senior swing motor is a ¼ -28 x 7/16 Hex head screw....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What is the length of the pull side surface mounted Sr Swing track?
As of April 14th, 2020- the Sr Swing Pull Side track is 8" long and 1" tall.See here for current pull arm instruction sheet....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
How long is the companion cable on the senior swing?
The length of the Sr Swing companion cable (9550-982) is approximately 54"....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Is the Sr Swing available with a door position switch?
The Sr Swing can be ordered with a door position switch on surface mounted push side units only.Sr Swing DPS is available on 9542DPS REGARM, 9553DPS REGARM2, 9563DPS REGARM2....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
When did the Sr Swing control box get updated from AC power out for accessories to DC?
The Sr Swing control box was updated from a 1.5A AC power output to 1A DC power out for accessories on December 9th 2019.The old version of the 8 wire P10 accessory cable had 2 white wires, the new ve...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
When you order the LCN sr swing header dress plate, part #9540-334-2, do you get one or two dress plates?
When ordering the LCN sr swing dress plate, 9540-334-2, you will get two dress plates, one for each end of the header, plus 8 mounting screws....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing

Support by product