Category: Senior Swing

(Results from 61 to 70)
What type of material is the Senior Swing -18 mounting plate made of and what is the size of the plate?
The Senior Swing -18 mounting plate is made of Aluminum and is 6 ¾" tall and ¼" thick and you specify required length when ordering....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Does the -518 sr swing cable parts bag come with the sr swing control box?
The -518 sr swing cable parts bag DOES NOT ship with the sr swing Control box.  It is shipped standard in the sr swing motor gearbox carton or can be order separately....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What is the weight and dimensions of the Senior Swing control box?
Approximate weight is 4 lbs. and it is 3.5" deep, approximately 11.25" long, approximately 4.5" tall...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What is the 9540DPS unit?
The 9540DPS, 9550DPS, and 9560DPS is a Sr. Swing push side unit with a Door Position Switch (8310-805C) that is installed in the arm and the spindle plate.  Recommended for blow open applications...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Can a surface mounted Sr Swing be used with Pocket Pivots?
You can use a Sr Swing, push side mounted with pocket pivots (use the push arm butt hinge/OP template) but you can't use the pull side mounted Sr Swing with pocket pivots because the swing of the door...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Can a Senior Swing be used with invisible hinges?
Any model of Sr Swing can be used with a Soss invisible hinge....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Does LCN offer an Operator with an extended long spindle?
LCN does not offer an extended spindle option for our Operators.  The only exception is a special application with the pneumatic 2610 operator X ST-1885, which uses a longer spindle to attach an ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial » Automatic Operators » Pneumatics » 2610 Series | Schlage Commercial » Automatic Operators » Pneumatics » 4810 Series | Schlage Commercial » Automatic Operators » Pneumatics » 4820 Series
What fuse does the Senior Swing use?
AC fuse, 120 VAC, 2.5 A time-delay...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Is there a date of manufacture on the LCN Sr Swing Control Box?
On the top of the CB has a sticker that says ‘inspected’. That sticker will has a four digit number, which is the month and year of manufacture....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Does the Senior Swing need to be on a dedicated circuit?
The Senior Swing line of automatic operators requires a dedicated circuit because any line noise could cause an issue with operation.   ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing