Category: Senior Swing

(Results from 51 to 60)
What is the difference between 9550 and 9560 Senior Swing operators?
The 9550 Sr. Swing is for a simultaneous pair door opening. There is 1 control box with 2 gearboxes that opens both doors together. Uses the 9550-982 companion cable.The 9560 Sr. Swing ...
Schlage Commercial » Automatic Operators » Electromechanical | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing » LCN
Can a Sr Swing operator be used in a blow open application?
See here for published Allegion Reference Sheet on using a Sr Swing in a blow open application....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing | Schlage Commercial
Can you order the senior swing mounting plate in special finishes?
For other individual swing parts in a RAL Powder Coat or standard powder coats EXCEPT for Matte Black, order as normal and standard RAL add on costs apply to RAL finishes.  This includes the -18 ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
How many boxes does a Sr Swing operator ship in?
The Sr Swing models 9530, 9540, 2810 ship in 3 cartons: 1 for the header, 1 for the motor/gearbox and 1 consolidation box (contains -control box, arm assembly, label kit etc).The Sr Swing models 9550 ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What parts are needed to convert a 9553 to a 9563?
You will need a 9550-3462 control box and a 9550-518 cable parts bag. ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
How long will the ES relay on the senior swing stay changed after activation?
The state of the P10 ES relay on all senior swing operators will stay activated upon activation until the door gets fully shut and then it will go back to the normal state....
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What is the screw size of the screws for attaching the sr swing filler or spindle plates?
The screw size is 8-32 x ¼" Machine screw, 4 per plate-depending on length.    ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
What parts are needed to change the handing on a 9530 or 9540 Sr Swing?
To change the handing on a 9530 or 9540 Sr Swing in the field, you will need to replace the Arm, and the Motor Gearbox.For a 9530-- Standard Arm- 9530-3077T(specify hand/finish) and Motor Gearbox 9530...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Will an operator will be damaged if the door is locked down (secure) after hours but the exterior actuator is not turned off/taking offline or the unit itself is not turned off?
Any good secure setup and installation should be getting an open signal that has already gone through credential access first (ex……card reader, keypad, Key switch) and ignoring a locked door. ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series | Schlage Commercial » Automatic Operators » Electrohydraulic » 4640 Series | Schlage Commercial » Automatic Operators » Electromechanical » Benchmark | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing
Can the 2800 series concealed operator be mounted in a hollow metal frame?
The 2810 series which includes the 2810, 2850 and 2860 models are all concealed operators and are the header of an opening.   So, since a Hollow Metal Frame consists of two side jambs and a head ...
Schlage Commercial » Automatic Operators | Schlage Commercial » Automatic Operators » Electromechanical » Senior Swing

Support by product