What is the Torx screw bit size for LCN High Security closers?
Special driver bits are required for installation or removal of Torx Machine Screws with a security pin as supplied with LCN High Security closers. All bits fit a 1 ⁄4" hex drive socket...
Schlage Commercial » Door Controls » High Security » 2210 Series | Schlage Commercial » Door Controls » High Security » 4210 Series | Schlage Commercial » Door Controls » High Security » 4510 Series
Can the 4510T be mounted like a 4020T, Top Jamb on pull side?
The 4510T standard closer can be mounted like a 4020T, pull side top jamb. You would need to follow ST-3472 for installation and reveal must not exceed 1/8". ...
Schlage Commercial » Door Controls » High Security » 4510 Series | Schlage Commercial » Door Controls » Surface Mounted » 4020 Series
Can the 4510T closer be used on 2” frame face?
The minimum frame face needed for mounting the 4510T High Security Track is 2-1/8” with standard templating. ST-3509 can be used for frame faces a small at 1-3/4” – This ST is...
Schlage Commercial » Door Controls » High Security » 4510 Series