Where is LEED v3 2009 information for Allegion brands?
LEED Certification is the process and acknowledgement of a project or building meeting certain pre-requisites and additional benchmarks that promote Leadership in Energy and Environmental Design (LEED...
LCN | Schlage | Von Duprin
How do I program my device?
The programming processes for Allegion devices can be both
product and features specific.
Some products programming processes are electronic in nature, others are
physical in nature.
Automatic Operators | Biometrics | Credentials | Door Controls | Doors and Frames | Electronic Locks | Exit Devices | Key Systems | Mechanical Accessories | Mechanical Locks | Power Supplies | Readers | Security Management | Software | System Components | Falcon | Glynn-Johnson | Ives | LCN | Schlage | Schlage Electronics | Steelcraft | Von Duprin
What is the Von Duprin warranty?
Von Duprin warrants that the product manufactured by it and delivered here under will be free of defects in material and workmanship for a period as follows:
Exit devices and trim for 36 months fr...
What is a Von Duprin 893P strike?
The 893P is not a strike, it is the UL label on a 6000 series strike. This label will not describe the strike you have....
System Components » Electric Strikes » 6000 Series » Von Duprin | Von Duprin
What is the best way to test the Von Duprin EL solenoid?
The best way to test the Von Duprin EL solenoid is with an ohm meter. You must test both coils to make sure the solenoid is good. The coil has three wires; green, yellow, and orange. The green wire i...
Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Von Duprin
What is the Multi Point LM9300 Series?
MultiPoint locks are three-point locking systems that secure the door at three points – top, bottom, and traditional center latch location. Operating just like traditional locks, MultiPoint locks ar...
Doors and Frames » Doors » B Series » Steelcraft | Doors and Frames » Doors » H Series » Steelcraft | Doors and Frames » Doors » L-Series » Steelcraft | Doors and Frames » Doors » Paladin PW Series » Steelcraft | Doors and Frames » Frames » F & FN Series » Steelcraft | Mechanical Locks » Mortised » LM9300 Series » Schlage | Mechanical Locks » Mortised » LMV9300 Series » Schlage | Schlage | Steelcraft | Von Duprin
How is the QEL calibrated?
Calibration is an internal process of the QEL device when energized the 1st time. The solenoid will pull and drop 3 times on a standard calibration. Calibration can be forced by press...
Exit Devices » Recessed » 94/95 Series INPACT » Von Duprin | Exit Devices » Touch Bar » 33A/35A Series » Von Duprin | Exit Devices » Touch Bar » 98/99 Series » Von Duprin | Power Supplies » Standard » PS900 Series » Von Duprin | System Components » Electrified System Component Accessories » Rectifier » Von Duprin | Von Duprin
What is the Buy American Act (BAA)?
BAA/ARRA stand for Buy American Act and American Recovery and Reinvestment Act.
A brief description of some of the federal requirements can be found in the BAA Catalog on the Allegion we...
Electronic Locks » Networked » AD 400 Series » Schlage Electronics | Electronic Locks » Offline » AD 200 Series » Schlage Electronics | Electronic Locks » Offline » CO 200 Series » Schlage Electronics | LCN | Schlage | Steelcraft | Von Duprin