Category: Keys

(Results from 11 to 20)
How to identify a Primus system using the 6 digits on the key.
The 6 digits stamped on the key can be referenced by the Key Control group to identify the system.  Please call 877-671-7011 option 1, option 1 and request the Key Control....
Key Systems » Cylinder Mechanism » Schlage | Key Systems » Keys » Keys » Schlage
Will Schlage make a cylinder in another vendors keyway?
Schlage only offers a limited number of keyways that match the BEST sections. Available in keys and cores.Specify keyway using the B suffix: AB = A, BB=B, CB=C, DB = D, DDB=DD, EB = E, FB = F, GB = G,...
Key Systems » Cylinder Mechanism » Schlage | Key Systems » Keys » Keys » Schlage
Can the Schlage L or LP section key blank be cut in the field?
Schlage does not recommend cutting the L or LP section key blanks in the field.  Below are some details.Non Primus:In the classic family of keyways the "L" key section is the highest level key.&n...
Key Systems » Keys » Keys » Schlage
How many change or user keys are supplied with a lock?
Two change or user keys are supplied with each lock....
Key Systems » Cylinder Category » Falcon | Key Systems » Keys » Keys » Schlage | Schlage
Will an Everest keys operate a Primus cylinder?
Primus cylinders can only be operated with a Primus key....
Key Systems » Cylinder Mechanism » Schlage | Key Systems » Keys » Keys » Schlage
How are interchangeable cores installed?
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an inte...
Key Systems » Cylinder Mechanism » Schlage | Key Systems » Cylinders » Cylinder » Falcon | Key Systems » Keys » Keys » Falcon | Key Systems » Keys » Keys » Schlage | Falcon
Can Everest D keys be 1 bitted?
These keys can be ordered and cut as 1 bitted....
Key Systems » Keys » Keys » Schlage
What is an SC keyway?
ILCO is a manufacturer that uses SC as a designation to represent Schlage keys.  ILCO is not affiliated with Schlage so a key with an SC designation was never manufactured by Schlage. The following...
Key Systems » Cylinder Mechanism » Schlage | Key Systems » Keys » Keys » Schlage
What is the part number for a full size interchangeable core control key?
Choose the appropriate full size control key from the selection below. Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard ...
Key Systems » Keys » Keys » Schlage
What is the difference between C and E keyway?
The profile or shape of the key is different.  This would apply to all key sections with differing names such as F, CE, etc....
Key Systems » Cylinder Mechanism » Schlage | Key Systems » Keys » Keys » Schlage