Category: Biometrics

(Results from 11 to 20)
How do you wire an HK-II for lock output using an Altronix RBSNTTL relay?
Set the reader to Lock & Aux under “Set Output Mode” in password 2.  See attached diagram for wiring....
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey
What is the current draw for F-series biometric readers?
600ma for power up and 300ma for normal operation...
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandPunch
What is the effect of direct sunlight on a biometric reader?
Sunlight can bleed into the template and cause the hand to appear smaller.  This will cause inaccurate results and/or rejects....
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandPunch
Do I have to replace the Platen on my hand reader if the blue hand outline wears away?
No, the blue outline is a guide for placing your hand and will not affect the operation the hand reader if it wears away....
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandPunch
Where is the IP address entered on a HK2 Biometric Hand Reader?
IP address needs to be manually entered on a HK2.  Press CLEAR then ENTER and                    &n...
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey | Schlage Commercial » Biometrics » HandPunch
How much does a HKII reader weigh?
A complete reader weighs 5.4 lbs....
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey
Is there a suggested method to update a Fconfig file to a HK2 Biometric reader when connected to a Windows PC?
You can use the DOSBOX application to emulate DOS commands after connecting your PC to the HK2....
Schlage Commercial » Biometrics
What is the difference between Platen Overlay and Platen assembly on a HK2 or HandPunch Biometric Reader?
 S-PL-F30 is the complete platen assembly and S-PL-F Platen overlay only the sticker with Hand Outline that is applied to the platen base....
Schlage Commercial » Biometrics
What is the maximum usable distance of an RS 232 cable?
50 Feet...
Schlage Commercial » Biometrics
How to create facility code for a user ID when you have an HK-2 connected back to ACP
At the HK-2You have to go to Password Menu #2Select Set Facility....
Schlage Commercial » Biometrics | Schlage Commercial » Biometrics » HandKey