Category: Glynn-Johnson

(Results from 11 to 20)
LCN / GJ Reference Chart
For LCN Cast Iron Closers See here.For LCN Alum Closers see here.For current ST pricing and templates please contact [email protected] or call 8776717011, press 2 for Product S...
Schlage Commercial » Automatic Operators » Electrohydraulic » 4630 Series » LCN | Schlage Commercial » Automatic Operators » Pneumatics » 2610 Series » LCN | Schlage Commercial » Automatic Operators » Pneumatics » 4810 Series » LCN | Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 410 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 450 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 81 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 90 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 70 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 79 Series » Glynn-Johnson | Schlage Commercial » Door Controls » Overhead Concealed » 2010 Series » LCN | Schlage Commercial » Door Controls » Overhead Concealed » 2030 Series » LCN | Schlage Commercial » Door Controls » Concealed » 3030 Series » LCN | Schlage Commercial » Door Controls » Concealed » 3130 Series » LCN | Schlage Commercial » Door Controls » Concealed » 330 Series » LCN | Schlage Commercial » Door Controls » Concealed » 5030 Series » LCN | Schlage Commercial » Door Controls » Concealed » 6030 Series » LCN | Schlage Commercial » Door Controls » High Security » 2210 Series » LCN | Schlage Commercial » Door Controls » High Security » 4210 Series » LCN | Schlage Commercial » Door Controls » High Security » 4510 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 1070 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 1460 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4010 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4020 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4030 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4040 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4110 Series » LCN | Schlage Commercial » Door Controls » Surface Mounted » 4000 Series » LCN | Schlage Commercial » LCN
Can the hold open parts on a 104H be removed so i can use it on a fire door?
The 100 series hold-open can be converted into a stop only, but it will not have the UL label on the arm for fire-rated doors....
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson
Is the door and frame prep the same for the older 100A overhead and the latest 100 model?
The preps in both the door and frame would be different....
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson
What mounting group do I use if I have a 100 overhead with a 3" thick door on center hung pivots?
No special template is required, use mounting group 3 for center hung pivots.  The door thickness does not matter on center hung pivots since the centerline of the pivot and the centerline of the...
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
Does Glynn Johnson still sell the 100A overhead stop?
The 100A was discontinued in 1995....
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson
Does Glynn Johnson send instructions with the hold open conversion kit?
The function conversion are shown in each model conversion kit installation booklet....
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 410 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 450 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 90 Series » Glynn-Johnson
Can a 1 1/2" offset pivot be used with a 410 holder / stop?
If the degree of opening is not critical, then use mounting group 1 and the degree of opening will be a few degrees less than the templated degree of opening.  If it is critical, then a special t...
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 410 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Hinges & Pivots » Ives
How is the 100 series from Glynn Johnson different from the 100 ADJ series?
The basic units are similar.  The ADJ has a 12" long track that is mounted in the frame to allow the degree of opening to be selected in the field anywhere from 85 to 110 degrees, where the standard ...
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson
Where can I find information on Glynn Johnson overhead stops?
See product information here....
Schlage Commercial » Mechanical Accessories » Holders and Stops | Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series | Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 280 Series | Schlage Commercial » Mechanical Accessories » Holders and Stops » 280 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 410 Series | Schlage Commercial » Mechanical Accessories » Holders and Stops » 410 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 450 Series | Schlage Commercial » Mechanical Accessories » Holders and Stops » 450 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 81 Series | Schlage Commercial » Mechanical Accessories » Holders and Stops » 81 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 90 Series | Schlage Commercial » Mechanical Accessories » Holders and Stops » 90 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » SensaGuard 280 Series | Schlage Commercial » Mechanical Accessories » Holders and Stops » 70 Series | Schlage Commercial » Mechanical Accessories » Holders and Stops » 70 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories » Holders and Stops » 79 Series | Schlage Commercial » Mechanical Accessories » Holders and Stops » 79 Series » Glynn-Johnson | Schlage Commercial » Mechanical Accessories | Schlage Commercial » Glynn-Johnson
For a Glynn Johnson Stop: Is 110 degrees the largest degree of opening ?
Yes.. However,  the spring will compress (if  using a spring model and have not templated for dead stop)  and the door will get an additional 5-7 degrees. ...
Schlage Commercial » Mechanical Accessories » Holders and Stops » 100 Series » Glynn-Johnson

Support by product