Category: 4040SE

(Results from 1 to 9)
What is the maximum pull side reveal for the 4040SE?
The Maximum Reveal for the 4040SE std arm mounted on the pull side is 1/8".The 4040SE has a DE arm option for mounting with pull side reveals over 1/8” up to 2-11/16” maximum.There is no option fo...
Schlage Commercial » Door Controls » Fire Life Safety » 4040SE
Did LCN ever sell a 4040SED that was powered by a 9v battery?
LCN did at one time offer a 4040SDB, which had a detector and was powered by a 9v battery.   It was obsoleted in DEC of 97 and no replacement parts are available....
Schlage Commercial » Door Controls » Fire Life Safety » 4040SE
Will the LCN 4040SEH hold open without power to unit?
The 4040SEH will NOT hold open without the proper power to the unit....
Schlage Commercial » Door Controls » Fire Life Safety » 4040SE
Can you mount a 4040SE pull side with a 4" reveal on a total door system?
ST-3351 is used when trying to mount a 4040SE pull side with a maximum of a 4” reveal and a Total Door System.  This will work with reveals between 2-11/16” and 4”. It uses a special D...
Schlage Commercial » Door Controls » Fire Life Safety » 4040SE
Can I use a on/off switch with the 4040SE closer?
You would wire the NC/COM contact of the on/off switch you are using, to one leg of the incoming power - if the switch opens, power is broken and the solenoid will release the hold open....
Schlage Commercial » Door Controls » Fire Life Safety » 4040SE
What size wrench is required to adjust the hold open force on an LCN SE track?
3/32 hex wrench ...
Schlage Commercial » Door Controls » Fire Life Safety » SEH Series | Schlage Commercial » Door Controls » Fire Life Safety » 4040SE | Schlage Commercial » 3130SE
What template do you use for the 4040SE mounted push side with a 18PA drop plate?
The template for mounting the 4040SE push side with a 4040SE-18PA drop plate is special template, ST-2844....
Schlage Commercial » Door Controls » Fire Life Safety » 4040SE
Can you use a 4040SE with swing clear hinges on the pull side?
Push Side Mount: Take the dimensions for the closer and track from centerline of swing clear hinge pin for the push side mount....
Schlage Commercial » Door Controls » Fire Life Safety » Fire/Life Safety Series » LCN | Schlage Commercial » Door Controls » Fire Life Safety » 4040SE
Can the 4040SE be mounted with pocket pivots?
You can use ST-3064 to mount the 4040SE push or pull side on an opening using pocket pivots. ...
Schlage Commercial » Door Controls | Schlage Commercial » Door Controls » Fire Life Safety » Single Point Hold Open Closer | Schlage Commercial » Door Controls » Fire Life Safety » 4040SE

Support by product