Category: XE360

(Results from 31 to 38)
Should sample card unlock XE360 out of box?
No, the credential can be added to software once commissioned or used as part of commercial construction mode....
Schlage Commercial » Electronic Locks » XE360
Can you link the XE360 with the Gateway?
No, you cannot link the XE360 with the Gateway....
Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Electronic Locks » XE360
XE360 Mount
Here are the part number for the mounts for the XE360 locksets:47709954 mount XE360 Exit47709953 mount XE360 Mortise47709952 mount XE360 Tubular...
Schlage Commercial » Electronic Locks » XE360
Why can’t I change the function on XE360I lockset?
The I in the part number XE360I is a storeroom only lockset.  You cannot make any other selections for it....
Schlage Commercial » Electronic Locks » XE360
On an XE360 what would cause the reader to stop reading fobs but allow the BLE creds to work?
If the XE360 is not recognizing Fobs but will work with the Zentra MAPP, chances are, the internal ribbons are not connected properly. You will want to take the lock off of the door and make sure that...
Schlage Commercial » Software » Zentra | Schlage Commercial » Electronic Locks » XE360
How to change the handing of a Schlage XE360 exit trim?
You typically need to remove the tailpiece assembly and spindle using a set screw and hex wrench, press the center of the assembly to release the lever, flip the lever around, and then reassemble...
Schlage Commercial » Electronic Locks » XE360
What color wires do I look for on a XE360 to determine the rex wires for exit?
The REX wires for exit are black and green...
Schlage Commercial » Electronic Locks » XE360
What is the best model of credentials to recommend for XE360?
You can use Model 8643T - Please contact your local Sales Rep to find out moreUS REGIONAL SALES OFFICE (RSO)​877-671-7011, option 39am - 5pm [email protected]...
Schlage Commercial » Electronic Locks » XE360

Support by product