Category: RC Reader Controller

(Results from 51 to 60)
Zentra No-Tour – Schlage RC compatibility
In order for a Schlage RC to be compatible with Zentra No-Tour functionality, it must be an updated version from the Schlage factory with the proper firmware and programming keys installed.  The ...
Schlage Commercial » Software » Isonas » RC Reader Controller | Schlage Commercial » Software » Zentra
Are the Schlage Reader Controller (RC11, RC15, RCK15) pigtail cables (47884474, 47274561 and 47274562) plenum rated?
No, the Reader Controller pigtail cables are not plenum rated....
Schlage Commercial » Software » Isonas » RC Reader Controller
What is the color code for the Schlage Reader Controller (RC11, RC15, RCK15) pigtail cable?
The color code wiring diagram for the Schlage Reader Controller pigtail cable can be found on page 10 of the Schlage RC reader controller user guide....
Schlage Commercial » Software » Isonas » RC Reader Controller
Is there a wiring diagram repository for Schlage Reader Controllers?
Yes, here is the link: https://commercial.schlage.com/content/dam/allegion-us-2/web-files/schlage/technical-documents/Schlage_RC_and_IP_Bridge_Riser_and_Wiring_Diagram_Guide_015497.pdf ...
Schlage Commercial » Software » Isonas » RC Reader Controller
Where can I find the release notes for Engage products?
All of the release notes for the Engage products can be found here:https://commercial.schlage.com/en/resources/troubleshooting-maintenance/engage-family-resources.html...
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Readers » Enrollment » MT20W | Schlage Commercial » Software » Isonas » RC Reader Controller
Schlage Reader Controller (RC11/RC15/RCK15) – 1.11.01 Firmware Information
Schlage RC: 1.11.01     This firmware includes disconnect fixes and compatibility with EV3 credentials for no tour programming...
Schlage Commercial » Software » Isonas » RC Reader Controller
Schlage RC – Disconnecting momentarily one time every 24 hours
The Schlage RC (RC11, RC15, RCK15) will automatically reset its connection once every 24 hours, usually 24 hours from the time it was last connected to the network.Ex: If the device was connected to t...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
How close can the Isonas readers be mounted to another?
We recommend at least 2 to 24" between any Isonas reader and any RF-emitting device.  Mounting them too closely can result in degraded or faulty performance....
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » RC Reader Controller
Can the Schlage R-1 be installed outdoors?
The RC-04, R-1, and Schlage RC can be mounted outdoors. To prevent water intrusion and humidity/condensation issues we recommend:   1)     Applying dielectric insula...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » RC Reader Controller
What is the maximum supported wiring distance between the Isonas RC03/04 and the ASM?
The maximum wiring distance supported, as the ASM/EDK uses RC232 one-way communication, is 50’....
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Readers » IP Based » Bridges and accessories (ASM/EDK) | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » RC-03 | Schlage Commercial » Software » Isonas » RC Reader Controller

Support by product