What does ‘Device Disconnect’ and ‘Device Connect’ events mean in Pure Access Cloud?
‘Device Disconnect’ and ‘Device Connect’ events are normal in Pure Access Cloud as long as the disconnect lasts approximately 15-30 seconds. These can be caused by Pure Access Cloud updates or...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » RC-03 | Schlage Commercial » Software » Isonas » IPBridge | Schlage Commercial » Software » Isonas » RC Reader Controller
Enabling and Changing Schlage RC (RC11, RC15, RCK15) Aux Input
The Schlage RC’s Grey wire (Auxiliary Input), when connected to the Black wire (Signal common/dc ground), can be used to remotely unlock the access point.In order to enable this function for the Acc...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
Enabling and Changing Schlage RC (RC11, RC15, RCK15) Door Sense (DPS) Input
The Schlage RC’s Blue wire (Door Position Switch Input), when connected to the Black wire (Signal common/dc ground), can be used to monitor the physical Open/Closed state of an access point.In order...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
Enabling and Changing Schlage RC (RC11, RC15, RCK15) Request-to-Exit (REX) Input
The Schlage RC’s Green wire (Request to Exit Input), when connected to the Black wire (Signal common/dc ground), can be used to monitor or release the access point.In order to enable this function f...
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
Device Connected to Pure Access Cloud Constantly Beeping
The Schlage RC has a built-in accelerometer that functions as a tamper sensor. This tamper alert is enabled by default once the reader successfully contacts Pure Access Cloud for the first time....
Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC Reader Controller
How are pin codes entered in Pure Access Cloud?
A PIN code must be entered as follows:“*”, PIN and then “#”...
Schlage Commercial » Software » Isonas » Pure Access Manager | Schlage Commercial » Software » Isonas » Pure Access Cloud | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » RC-03 | Schlage Commercial » Software » Isonas » IPBridge | Schlage Commercial » Software » Isonas » RC Reader Controller