Category: TM Series

(Results from 21 to 30)
Does the TM series have clutching levers?
Locking levers on the TM series will rotate freely and there is no option to make locked levers rigid....
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series
Is ligature resistant trim available for the TM series?
The ND series HSLR trim cannot be used with the TM series?...
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series
Does the Falcon TM series meet Buy American Act (BAA?
The Falcon TM series meets the Trade Agreement Act (TAA)....
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series
Are the spring cages the same for Falcon electrified and non-electrified TM series?
The spring cage assemblies are the same for both electrified and non-electrified Falcon TM series....
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series
How do the FSIC Schlage tailpieces for the Falcon TM series install?
The FSIC Schlage tailpieces/drivers for the Falcon TM series will snap into the cap similar to Schlage ND series FSIC tailpieces/drivers. ...
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series
Are Schlage retrofit cylinders available for the Falcon TM series?
Retrofit KIL cylinders from Schlage will be available for the Falcon TM series. Refer to the Schlage price book or contact Schlage tech support for part numbers....
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series
Can the TM series be specified to accept Medeco 31 or Medeco 32 IC cores?
Yes. The TM series can be specified to accept a Medeco KIL cylinder (L-MED)....
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series
Can the TM series be specified to accept Yale cylinders or IC cores?
Yes. The TM series can be specified to accept Yale 6-pin KIL (1801) cylinders (L-YA6), Yale 6-pin IC (1210) cores (J-YA6) or Yale 7-pin IC (1220) cores (J-YA7)....
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series
What backset latch options are available for the TM series?
NOTE: The 3-3/4" backset spring latch is NON-RESTORING. The TM291 and TM301 will NOT have the restoring functionality if the 3-3/4" backset spring latch is used....
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series
On the Falcon TM series, do 7-pin KIL cylinders require a different lever?
7-pin KIL cylinders used on the Falcon TM series require a different (extended shank) lever. The 7-pin KIL lever (pt # 47369200) is only available in the DANE lever style and will accommodat...
Schlage Commercial » Mechanical Locks » Cylindrical » TM Series

Support by product