Category: IPBridge

(Results from 31 to 33)
On an IP-Bridge, what type of wiring is recommended for Input and Output Connections?
Recommendations:(Note all wires should be shielded, twisted-pair to prevent crosstalk and EMI)Note:18 AWG or larger if Using DC power connector.Recommend 22 AWG for reader wiring, up to 250 ft.  ...
Schlage Commercial » Software » Isonas » IPBridge
My Isonas device (RC03, RC04, IP Bridge) is showing as not connected in my Pure Access Cloud tenant.
Disconnected readers will continue to function in an offline state so long as they are powered up.  Their function will be based upon the information in the last compile that they completed while...
Schlage Commercial » Software » Isonas | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » RC-03 | Schlage Commercial » Software » Isonas » IPBridge
How do you update firmware on an MTB reader integrated with an IP Bridge in Zentra?
In the Zentra mobile app, in the "Devices" menu, pair to the device that the MTB is commissioned to.The MTB s/n and firmware level will be displayed; as well as the MAC address for the IP Bridge it wa...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Software » Isonas » IPBridge | Schlage Commercial » Software » Zentra

Support by product