Category: FE410

(Results from 21 to 30)
FE410.. when a card is presented... it gives a long beep.. then opens door..
Yes the Control lock firmware has a user indication if the real time clock tried to default back if power was lost in the lock for an extended period of time. To clear the long beep, please do a...
Schlage Commercial » Electronic Locks | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
What comes with Part # 10-152 for the FE410 locks?
STANDARD - Combo Strike, Square Corner (10-094 & 10-026). 10-094 Square Corner Strike, 1  1/8" x 2  3/4" 10-026 Square corner, full lip, no box, 1  5/8" x 2  1/4". ...
Schlage Commercial » Electronic Locks | Schlage Commercial » Multi-Family » FE410
What is the part # for the FE410 screw pack?
Part number for the FE410 screw pack is:47244558 - Specify finish option (619, 622, 625, 626 or 716)...
Schlage Commercial » Electronic Locks | Schlage Commercial » Multi-Family » FE410
What is the part # for the security screws for the FE410?
Optional Security torx screwsPart number is: 47250323 - Specify finish option (619, 622, 625, 626 or 716)...
Schlage Commercial » Electronic Locks | Schlage Commercial » Multi-Family » FE410
Will the Control locks (BE467/FE410) retain the audits in the lock after it has been factory defaulted?
Yes, the lock will hold all of the audits in even after it has been factory defaulted.  You can sync the lock after commissioning it again, all your audits will come in to the Engage. ...
Schlage Commercial » Electronic Locks | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
How do you unlock a Schlage Control lock that has a dead battery?
Battery Jump Procedure: The emergency battery jump start can be used to unlock the door if the batteries are dead.  WARNING: The lock will remain unlocked until you change the battery and reloc...
Schlage Commercial » Schlage Electronics | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
Will the levers from CS210 lock work on the FE410?
On the FE410, they can use the levers from the CS210 locks. Part number: 06-242 specify design, specify finish.   Comes as a pair of levers (2) Use the same part number with the diff...
Schlage Commercial » Electronic Locks » Offline » Multi-Family | Schlage Commercial » Electronic Locks » Offline » Multi-Family » Schlage Electronics | Schlage Commercial » Multi-Family | Schlage Commercial » Multi-Family » FE410
Schlage Control FE410 - Lever Handing
The locks are handed from the factory, but they are field reversible.Details on re-handing are in the installation guide.  ...
Schlage Commercial » Multi-Family | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
Schlage Control BE467 and FE410 - Split Finish
Yes, always list the exterior style and finish first followed by the interior style and finish....
Schlage Commercial » Multi-Family | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
When is a BE467’s battery considered critically depleted?
• Batteries: Uses 4(ea.) AA alkaline batteries (provided in the box)•+6.0VDC typical operating voltage• “Battery Voltage” is available via Audit events –• Low Battery = 4.4 VDC•Reporte...
Schlage Commercial » Multi-Family » FAQ | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467