Category: Republic

(Results from 81 to 90)
What published standards do Republic DL Doors adhere too?
A. ANSI A250.8-2017 (SDI 100) - Recommended Specifications - Standard Steel Doors & Frames; Steel Door Institute.B. ANSI A250.4 - Test Procedure & Acceptance Criteria for Physical Endurance fo...
Schlage Commercial » Republic
Is the Republic DP series door handed?
No, the handing design is square edge, non-handed....
Schlage Commercial » Republic
Does the Republic DP series door come standard with a universal hinge prep?
Yes. The universal Hinge Prep allows for an easy modification from standard to heavy weight hinge prep....
Schlage Commercial » Republic
What is the actual door size of a Republic DL series door?
 Door undersized from nominal by 1/4" in width and 7/8" in height....
Schlage Commercial » Republic
What is the standard undercut on a Republic DL series door?
Standard undercut is 3/4"....
Schlage Commercial » Republic
What hinge edge reinforcements are available for the Republic DL series door?
Hinge edge is non-beveled and reinforced with a continuous16 gauge steel channel (Optional 10 gauge - DE Series) projection welded at a maximum of 5" on center− Additional reinforcement plates are p...
Schlage Commercial » Republic
What lock edge reinforcements are available for the Republic DL series door?
Lock edge is square and reinforced with a continuous 16-gauge steel channel projection welded at a maximum of 5" on center (Optional - Beveled 1/8" in 2")− 16-gauge reinforcements for mortise or cyl...
Schlage Commercial » Republic
What type of edge seam is available on the Republic DL series door?
Visible seam is standard. Continuously welded seamless or intermittently welded seamless available. (Options)...
Schlage Commercial » Republic
What closer reinforcements (optional) are available on the Republic DL series door?
Closer reinforcement – 14 gauge 18" x 6" (Optional 12 gauge)...
Schlage Commercial » Republic
What face skins are available on the Republic DL series door?
20 gauge, 18 gauge, 16 gauge, or 14 gauge (DE Series) (cold rolled steel or A60 galvannealed)− G90 Galvanized available in 16 or 14 gauge only...
Schlage Commercial » Republic

Support by product