Category: Republic

(Results from 71 to 80)
Can Republic frames be insulated?
Yes, there are specific application where Republic frames can and should be insulated such as our STC frames which must be fully grouted or filled with sound deadening insulation (fiberglass batting)...
Schlage Commercial » Republic
How do I properly hand Republic communicating frames?
Helpful information for handing communicating frames is found on the iDigHardware site here: https://idighardware.com/2018/03/wwyd-handing-for-communicating-doors/ ...
Schlage Commercial » Republic
Where can I find a copy of the warranty for Republic Doors and Frames?
The Republic Doors and Frames warranty is found in the Allegion Commercial Warranty document found here: https://us.allegion.com/en/resources/resource-library/document-library/allegion-documents.html ...
Schlage Commercial » Republic
What SDI 100 Level/Model is the Republic DP series door?
Level 1 Model 1 (Standard Duty, minimum 20 gauge, hollow steel composite)Level 2 Model 1 or 2 (Heavy Duty, minimum 18 gauge, hollow steel composite)...
Schlage Commercial » Republic
What thickness is available for Republic DL series doors?
1-3/4" (14 gauge = 1-13/16")...
Schlage Commercial » Republic
What published standards do Republic DL Doors adhere too?
A. ANSI A250.8-2017 (SDI 100) - Recommended Specifications - Standard Steel Doors & Frames; Steel Door Institute.B. ANSI A250.4 - Test Procedure & Acceptance Criteria for Physical Endurance fo...
Schlage Commercial » Republic
Is the Republic DP series door handed?
No, the handing design is square edge, non-handed....
Schlage Commercial » Republic
Does the Republic DP series door come standard with a universal hinge prep?
Yes. The universal Hinge Prep allows for an easy modification from standard to heavy weight hinge prep....
Schlage Commercial » Republic
What is the actual door size of a Republic DL series door?
 Door undersized from nominal by 1/4" in width and 7/8" in height....
Schlage Commercial » Republic
What is the standard undercut on a Republic DL series door?
Standard undercut is 3/4"....
Schlage Commercial » Republic

Support by product