Category: Republic

(Results from 61 to 70)
What hinge reinforcement is available for Republic ME Double egress Series frames?
Universal Standard/Heavy Weight Hinge –Frames for 1-3/4" doors shall have a 7 gauge steel hinge reinforcement plate, projection welded with provisions for 4-1/2" x 4-1/2" template hinges.  Hing...
Schlage Commercial » Republic
What face sizes are available for Republic ME Double egress series frames?
1-3/8" standard, 2" optional...
Schlage Commercial » Republic
What is the maximum fire rating for Republic ME Double egress series frames?
Maximum 3 hours...
Schlage Commercial » Republic
Are Republic ME Double egress series frames handed?
All double egress openings shall be supplied as right hand swing unless otherwise specified....
Schlage Commercial » Republic
What is the purpose of Republic ME series Double egress frames?
Double Egress Openings are designed to permit the flow of traffic in two directions through the same opening....
Schlage Commercial » Republic
What closer reinforcements (optional) are available on the Republic DP series door?
14 gauge standard...
Schlage Commercial » Republic
What face skins are available on the Republic DP series door?
20 gauge or 18 gauge, Cold Rolled Steel or A60 GalvannealedAll DP Embossed are A40 galvannealed...
Schlage Commercial » Republic
What type of bottom channel is available on the Republic DP series door?
Bottom Channel is an inverted 16 gauge channel, projection welded at a maximum 2-1/2" on center...
Schlage Commercial » Republic
What type of top chanel is available on the Republic DP series door?
Top Channel is a 16 gauge flush channel, projection welded at a maximum 2-½" on center. (Optional - Inverted)...
Schlage Commercial » Republic
What type of edge seam is available on the Republic DP series door?
Visible seam...
Schlage Commercial » Republic

Support by product