Category: CTE

(Results from 81 to 87)
Can a deleted device be added back into Engage?
Yes, you must perform a factory reset on the device (see user guide for lock model).  From the Engage mobile app, click + icon in device screen, follow the prompts.  After adding the device,...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467 | Schlage Commercial » Software » Engage
What is Wi-Fi error ref code 04 on CTE?
This means the Wi-Fi circuit on the CTE controller has failed to turn on. Power cycling the controller will correct this in most cases. ...
Schlage Commercial » Electronic Locks » CTE
How long can a CTE be without power before losing memory?
The CTE would be expected to retain users, schedules, and settings for any amount of time but, the RTC would have lost time/date and need to be synced...
Schlage Commercial » Electronic Locks » CTE
Is CTE controller available without reader?
No, an MTB11 or MTB15 is always included....
Schlage Commercial » Electronic Locks » CTE
What is the process to replace a card reader on CTE?
After plugging in or rewiring new reader, press Schlage button once followed by very quick press of the FDR button twice. Or you can also power cycle the controller...
Schlage Commercial » Electronic Locks » CTE
What causes alternating red/green flash on CTE after normal credential presentation?
Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Software » Engage
What are some of the causes for a wi-fi connectivity issue on a CTE?
1. Weak Wi-Fi signal: The CTE controller may be out of range or have a weak signal due to physical obstructions like walls or floors. 2. Incorrect Wi-Fi settings: The CTE may be configu...
Schlage Commercial » Electronic Locks » CTE

Support by product