Category: CTE

(Results from 61 to 70)
Can you use an Engage CTE with an RSI Gateway?
No, you cannot use a CTE controller with an RSI-485 Gateway.It is only compatible with an IP Gateway....
Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Electronic Locks » CTE
What card readers work with the CTE?
Because of the secure features, CTE only operates with a Schlage MT11-485 or MT15-485 wall reader.The CTE is only sold as a KIT which includes the choice of MT11-485, narrow mullion, or MT15-485, squa...
Schlage Commercial » Readers » Multi-Technology | Schlage Commercial » Schlage Electronics | Schlage Commercial » Electronic Locks » CTE
How do you decommission a device from Engage?
Log into the Engage Software on your mobile device:1. Open the Devices screen2. Find the device you want to delete in the list3. iOS: Swipe left on the device name to show the Delete button. Then tap ...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467 | Schlage Commercial » Software » Engage
What Input option should be used for 'buzz-in' component on CTE?
On the CTE controller, use the REL (for release) as the input termination for the intercom or ‘buzz-in’ component. ...
Schlage Commercial » Electronic Locks » CTE
Zentra - What Devices Are Supported?
The Schlage/Isonas devices supported by Zentra Living (as of March 2024):Schlage Control (BE467 and FE410)Schlage RC Reader Controller (RC11, RC15, RCK15)Devices Coming to Zentra Living:Schlage NDE-se...
Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467 | Schlage Commercial » Software » Isonas » RC-04 | Schlage Commercial » Software » Isonas » IPBridge | Schlage Commercial » Software » Isonas » RC Reader Controller | Schlage Commercial » Software » Zentra
How can I downgrade firmware on an Engage device?
NDEB, LEB, MT20W and Control locks are able to be downgraded to an earlier version of the firmware.Some devices, once they have the most recent updated firmware, you are unable to downgrade ...
Schlage Commercial » Electronic Locks | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » Gateway | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE
Can the Schlage MTB readers read HID/Seos and prox credentials at the same reader?
Out of the box the MTB readers can only read the card serial number (CSN) on the HID credentials and can read proximity credentials up to 37bit format. These setting can be configured in the Engage so...
Schlage Commercial » Credentials » Multi-Technology | Schlage Commercial » Electronic Locks » CTE
What does it mean if no reader tab is present in CTE settings on Engage website?
The reader is not synchronized for secure communication with the controller.Follow the steps below to synchronize the reader to the CTE.1. Test and sync the CTE with the RS-485 reader.2. Push and rele...
Schlage Commercial » Electronic Locks » CTE
Do I need to be certified in order to install and program a CTE controller?
No, you do not have to be certified to install or program the CTE controller....
Schlage Commercial » Electronic Locks » CTE
What changed with the readers that come with the CTE?
The old readers for the CTE were either MT11-485 or MT15-485, the new readers are the MTB 11/15 readers. They current MTB readers have 485, Weigand and BLE mobile credential capabilities....
Schlage Commercial » Electronic Locks » CTE

Support by product