Does CTE have switch settings that can be changed?
Yes, CTE has input switch settings that allow the input active or inactive to be changed. The switches are directly above the Input LEDs and Input connector blocks.
...
Schlage Commercial » Electronic Locks » CTE
What are the wifi alerts that can be enabled under a Engage site in Global settings?
When enabled, wifi alerts are used on the NDEB/LEB/CTE
When a “forced door” happens the lock will connect to the wifi network and report the “forced door” alert in the audits.
...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE
What does no-tour mean?
The No-Tour feature allows Administrators to assign and change access rights to a lock without having to physically visit the lock to make access programming updates.
Using the MT20W enrollment ...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Readers » Enrollment » MT20W | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
How can I confirm that the Engage locks are updating via WiFi overnight?
The next morning, check the audits for any WiFi events.
You will see WiFi powered on and when finished WiFi power off.
You will also see all the audits from the previous day.
...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE
Can the CTE controller be set for use with Construction fobs?
Construction mode is used to allow access before the CTE controller is commissioned, and for testing purposes.
• Enabled by default.
• The CTE controller will remain in construction acces...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » CTE
The Engage app doesn’t see the Engage lock show up during commission, “no device found”.
Here are the reasons why Engage will not see the lock:
Device has previously been a commissioned to another site.
After power cycle battery cover must be in place (no tamper) before pos...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467
CTE reader TEST
The reader must be connected to the RS-485, NOT to the weigand.
To test and confirm the operations of the CTE and RS-485 reader, try the following steps.
CTE to MT-485 reader connection is o...
Schlage Commercial » Schlage Electronics | Schlage Commercial » Electronic Locks » CTE
What is the maximum number of locks on a standard Engage site?
At launch, Engage managed sites were only capable of supporting up to 100 NDE locks per site. With recent updates to the Engage platform, as well as the addition of new products, Engage managed sites ...
Schlage Commercial » Electronic Locks » ENGAGE Application | Schlage Commercial » Electronic Locks » ENGAGE Application » Web App | Schlage Commercial » Electronic Locks » NDE Series | Schlage Commercial » Electronic Locks » LE Series | Schlage Commercial » Electronic Locks » CTE | Schlage Commercial » Multi-Family » FE410 | Schlage Commercial » Multi-Family » BE467